Innovation for life ES- HOSPITALITY LCD TELEVISION MODEL NO.
ii Important safety instructions Warnings Cautions Accessories Installing and removing the stand Installing the stand Attaching the TV to the desk Removing the stand Installing a wall-mount bracket TV components Front and side controls Back connections Remote control Using the remote control Installing remote control batteries Aiming the remote control Making connections Connecting the power Selecting a location Connecting an HDMI device Connecting a component video device Connecting an antenna,cable T
LTDN40V86MH 1 f CHILD SAFETY It makes a difference how and where you use your flat panel display As you enjoy your new product, keep these safety tips in mind The issue The home theater entertainment experience is a growing trend, and larger TVs are popular purchases. However, TVs are not always supported on the proper stands or installed according to the manufacturer’s recommendations. We and the consumer electronics industry are committed to making home entertainment enjoyable and safe.
2 /7'1 9 0+ Important safety instructions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol indicates that dangerous voltage constituting a risk of electric shock is present within your TV. This label is located on the back of your TV. This symbol indicates that there are important operating and maintenance instructions in the literature accompanying your TV. 1 2 3 4 5 6 7 Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions.
LTDN40V86MH Installing and removing the stand Cautions Damage requiring service Unplug this TV from the power outl service personnel under the following conditions: When the power supply cord or plug is damaged or frayed. If liquid has been spilled or objects have fallen into your TV. If your TV has been exposed to rain or water. If your TV does not operate normally by following the operating instructions.
4 LTDN40V86MH TV components 2 Lay the TV (screen down) on the edge of the table or bench. Make sure that you put a soft cloth or cushion between the table or bench and the TV. 3 Align the base with the TV, then secure the stand to the TV with the 4 screws provided. Installing a wall-mount bracket If you want to attach the TV to a wall-mount bracket (not provided), you Warning only.
LTDN40V86MH TV components 1 6 PC AUDIO USB Remote control HDMI3 Back connections 5 INPUT CCD MTS/SAP ASPECT SLEEP SOUND PICTURE INFO GUIDE VGA PC 5 TV MUTE CH VOL DMP 4 MENU EXIT RJ12 COMP1 HDMI2 HDMI1 11 ENTER 6 COMP 2 Y 4 PB PR L R L R VIDEO L HEADPHONE ANT IN R SERVICE 7 DIGITAL AUDIO OUT Item Name AUDIO OUT AV 8 9 10 3 2 3 4 5 6 7 8 9 0 LAST 2 Description Thise unit has standmd USB interface and can be connected the standavd USB 1.
6 LTDN40V86MH Item Name 7 Description MENU Display the main menu.Back menu display. Press or menus. 8 9 Using the remote control to move up or down in on-screen Press or to move left or right in on-screen menus or to adjust menu settings. ENTER 10 Numbers 11 dash) or to open sub-menus. Press the number buttons to enter channel numbers or the parental control password. For more information. Press to select a digital sub-channel.
7 LTDN40V86MH Making connections Making connections HDMI device Before you make any connections: Check the plugs on the ends of cables to make sure that they are the correct type before you try plugging them into jacks on the TV. Make sure that all plugs are securely inserted into the jacks. Loose connections can result in image or color problems. When connecting devices to the TV, make sure that the TV and HDMI cable HDMI2 HDMI1 COMP 2 unplugged.
LTDN40V86MH Making connections To play from the component video device: 1 Turn on the TV, then press INPUT. The INPUT SOURCE menu opens. 2 Press or to select Component1 or Component2, then press ENTER. 3 Turn on the component video device and start playback. Refer to the instructions that came with the component video device.
LTDN40V86MH Understanding the basics Connecting using a digital audio cable RJ12 PC COMP1 Connecting a home theater system VGA PC AUDIO HDMI3 USB To connect using a digital coaxial cable: 1 Make sure that your TV’s power cord is unplugged and the home 2 Connect one end of a digital coaxial audio cable (not included) to the DIGITAL AUDIO OUT jack on the back of the TV. DIGITAL AUDIO OUT Understanding the basics 1 Plug the power cord into an AC power outlet. 2 Press (power). Your TV turns on.
10 LTDN40V86MH Understanding the basics Displaying program information Preset Mode To display program information: conditions. Press INFO to show an information banner. The information banner shows current program information such as channel number, video input source, and resolution.
LTDN40V86MH Understanding the basics DMP V-Chip Lets you select certain programs to be blocked. Lets you change access password. Transparency Adjust the transparency of menu 3 DMP Slide time Lets you set the TV close time of every day. 11 Long Transitions None Rotate 0 Zoom 1X Features Move: OSD Timeout Adjust the time takes the OSD to disappear when no operations are performed.
12 LTDN40V86MH Adjusting picture and sound Zoom2 —Enlarges the picture but may crop the top and bottom of picture. And no black bar on right and left. Panorama —Stretches the picture at the edges, but maintains a good aspect ratio at the center of the screen. Adjusting the picture To adjust the picture: In TV mode, you can adjust: Note: In analog TV mode, allows you to select all aspect modes. In digital TV mode, allows you to select Normal mode and fullscreen mode.
LTDN40V86MH Changing channel settings Adjusting the Features U.S. TV ratings (age-based) These ratings are determined by the Federal Communications Commission (FCC). To change the channel settings: In TV mode, you can adjust: 1 Press MENU. The Main menu opens. 2 Press or to highlight Features, then press ENTER or . The TV menu opens. Features TV Caption settings >>> Sleeptimer 0 TV-Y All children. TV-Y7 Suitable for children 7 and older. TV-G General audiences.
14 LTDN40V86MH Changing channel settings Change PIN–Change the password of the V-Chip function. Transpaerncy–Adjust the transparency of menu. OSD Timeout –The time it takes the OSD to disappear when no operations are performed. You can change it from Off, 5 seconds, 10seconds, and 30seconds. Adjusting the Installation To change the channel settings: In TV mode, you can adjust: 1 Press MENU. The Main menu opens. 2 Press or to highlight Installation, then press ENTER or . The TV menu opens.
LTDN40V86MH Troubleshooting 15 Troubleshooting Before calling for service, check the following information for possible solutions to problems you may experience. If none of these solutions Caution: Do not try to repair the TV yourself. Refer all servicing to Remote control Problem Solution Remote control does not work. Make sure that the TV power cord is plugged in. Make sure that there are no obstructions between the remote control and the remote control sensor on the front of the TV.
16 LTDN40V86MH Maintenance Just like with any other household appliance, the performance and life-expectancy of your TV depends on how well you maintain it. Follow the procedures described here to clean the TV case and the LCD screen. Cautions: disconnected from the power outlet before cleaning the TV. Never spray or pour any liquid directly onto the screen or the case. Cleaning Clean your TV with a soft, dry cloth.
LTDN40V86MH Hotel Settings 17 Adjusting hotel settings To adjust hotel settings: 1 Press MENU. The Main menu opens. 2 Press or to highlight SOUND, then press ENTER or , audio menu opens. Press or to highlight balance, use or to adjust to zero, then press the number buttons to enter the threedigit password 5 4 8. The Hotel Settings Menu opens. Sound TV Sound mode Standard Equalizer >>> Balance Move: 0 Enter: OK Exit: Balance EXIT LOGO —Allows installer to choose one of three options.
18 LTDN40V86MH Hotel Settings Feature Lock —Locks Feature menu adjustment in menu. Installation Lock—Locks Installation menu adjustment in menu. DMP Lock —Locks DMP menu adjustment in menu. V-Chip—Locks V-Chip function in menu. Info Lock OFF : Programing name and description (if available) are displayed when info button on remote is touched. Programing info may also be available depending on provider. ON : No detail information on channel. Hotel mute— Allows installer to mute TV speaker.
