To Use the Menu 1 Press the [MENU] button to open tha main menu. % Crass [4/7] to select 8 many option, then press [ENTER] io enter the men. 4 in sate menu, you can: % Press to select an item, # Cross fo adjust the value, or # Press [Bp /ENTER] to enter the subhuman, % Press [RETURN] to exit the sub menu. 4 Press [EXIT] button to exit the menu. Ef Note FOR ILLUSTRATION ONLY, Using the Picture Menu Yom can adjust: Picture Mods ~ Adjust the Replete Mode.
an 0 Sound Surround Simulates surround sound end enhances bass responses. Speaker You can select On (default setting} to play suicide through TV speakers, or select OF to play audio through the speakers on an textual audio system, Digital Audi Output ~ Send digital audio to an external! audio system. You can select PCM, RAW or OF. PCR: PCM outputs two channel audio regardless of the input format. R&W: Passes through (output = input) the incoming audio signal without decoding. E.g.
Using the Settings Menu You can adjust: Language You can select the menu's languages to English, Espalier or Fran gals. Blend Settings You can set On-screen many system. Timeout: Select the display time of the menu: 60 seconds. Tine Setup Sst the teems zone, daylight saving, time and sleep timer. Time Zones: Select your local dims zone: Eastern Time, Indiana, Central Tami, Mousiness Time, Arizona, Pacific Time, Alaska or Hawaii. Daylight Saving: Set the Daylight Saving time for your area.
NOTES # HOMO cables must be used to connect HDMI CEC -~ compatible devices to your TV, # The connected device's HDMI CEC feature must bs turned an, @ If you connect sn HDMI device that is not HDMI CEC compatible, all the HDMI CEC Control features do not work, # Depending on the connected HDMI device, the HDMI CEC Control feature may not work. Playback Device 2: You van manual ast your playback device in Standby or Power On. Setup: You can set HDMI CEC function.
Network Connection You can set up your TV so that i can access the Internet through your local area network (LAN) with a Ethel or wireless connection. * Connecting to a Wired Network You can attach your TV to your LAN by one of the three following ways: % You can attach your TY to your LAN by consenting the LAN port on the back of your TV fo an textual modem using a Cat § LAM cable. See the diagram below.
+ Network Setup {Auto} Usa the Automatic Network Setup wheels your connecting the TV ip a network that supports CPD. To set up your TV's cable network connection automatically, follow these steps: % How to set up automatically 1. Connect your TV fo your LAN as described In the previous session. 2. Tum on your TV, operate according to the description In the Settings menu until the Network screen appears. 3. On the Network acre an, select Configuration and pass {ENTER] button io enter the sub menu, 4.
» Connecting to a Wireless Network To connect your TY i your network tirelessly, vou need a wireless router or modem. See the illustration below. § {Wireless IP Sharer{Router} pg | AN Port on {with CPD Server) the Wall Wirehairs LAN Adapter built-in TV sat LAN Gable Incense's bull-in Wireless LAN Adapter supports the [EEE 802.11 big/n communication protocols. Hi sense recommends using {EEE 802.11n router. When you play the video over a IEEE 802.11b/g connection, the video may not play smoothly.
= Wireless Setting How to set up 1. Tum on your TV, operate according to the description in the Sittings menu until the Network screen appears. 2. On the Network screen, select Configuration and press [ENTER] button to enter the subbasement. 3. Sat Internet Connection to On and interfaces to Wireless. 4. Select Wireless Setting and press [ENTER] bunion fo enteric. You can reckless Scan / Manual / Auto. 5. If you select Scan, a screen will appear listing sll of the wireless networks within range of the TV.
To set up your TV's network consecration manually, follow these steps: + Follow Steps 1 through § in the “How fo set up automatically” procedure, « But Address Type to Manual, 8. Set Address Type to Manual, enter IP Set ling. Then press [4/7] bunion to select IP Address and press [d/b] button fo move the cursor io the entry field, Then press 0~8 buttons to enter the numbers, 8. Press [MENU] button to exit IP Address and press [4/7] bunion to stemless the next options to enter the numbers.