User's Manual

17
You can adjust:
Configuration -
Select On or Off. When On mode is
selected, the following options are available.
Internet Connection :
Setting the Internet Connection.
Interface :
You can set up your TV so that it can access
the Internet through your local area network (LAN) with a
Ethernet or wireless connection.
Wireless Setting :
You can set up your TV’s wireless
connection.
Information :
Display network configuration information.
IP Setting :
Allows you to set IP address, subnet mask,
gateway, primary and secondary DNS.
Connection Test :
Press the [ENTER] button to test
network status.
Basic Features
Device Auto Power Off:
When HDMI CEC is enabled,
this function turns off HDMI CEC devices when you turn off
your TV.
TV Auto Power On:
When HDMI CEC is enabled and
you turn on an HDMI CEC device, this function turns on
your TV automatically.
Audio Receiver:
When HDMI-CEC is turned on and you
have connected an audio receiver to your TV, turning on
Audio Receiver lets you use your TV’s remote control to
control the volume on the audio receiver.
Device Root Menu:
You can open an HDMI-CEC-
compatible device’s root menu, then use your TV’s
remote control to control the device.
Device Discovery:
Displays a list of HDMI CEC devices
that are connected to your TV.
NOTES
HDMI cables must be used to connect HDMI CEC-
compatible devices to your TV.
The connected device’s HDMI CEC feature must be
turned on.
If you connect an HDMI device that is not HDMI CEC-
compatible, all the HDMI-CEC Control features do not
work.
Depending on the connected HDMI device, the HDMI-
CEC Control feature may not work.
Power LED -
Select this feature to turn off or On the Power
LED indicator on the front panel on your TV.
Version Info -
View the software version information.
Reset Settings -
Restores the TV configuration to factory
settings.
Using the Network Menu
Auto Upgrade -
Update the software using the Internet.
Configure your network. For detailed procedures on using
the Network Setup, refer to the “Connecting to the Internet
or a network” instructions. If you want the Network Update
to work automatically, please select Auto Updates (On).
If you want to do the Network Update manually, please
select Auto Updates (Off).
If the Internet connection doesn’t operate properly, check
the Network Configuration settings and try again. If the
problem persists, use the USB method below to update.
Firmware Upgrade -
Insert a USB drive containing the
software update file, downloaded from the Hisense website.
(http://www.hisense-canada.com/).
Please be careful not to disconnect the power or remove
the USB drive until updates are complete. The TV will
be turned off and on automatically after completing the
software update. When software is updated, video and
audio settings you made will return to their default settings
and your personal settings will be deleted. We advise you
to write down your settings so that you can easily reset
them after the update.
Applications -
Network application.
DLNA:
Digital Media Player (Hi-DMP) feature of Digital
Living Network Alliance. Press the [◄/►] buttons to set
DLNA to On.
Network
Personalize the
network connection
settings.
Configuration
Auto Upgrade
Firmware Upgrade
Applications
>
>
>
Off