User's Manual
Table Of Contents
- Register Your TV to Receive Hisense News
- Locating Ports and Buttons on Your TV
- Buttons and Ports on the Hisense•Roku TV
- Connecting Devices to Your TV
- Connecting an antenna, cable or satellite box
- Connecting an Audio Visual (AV) device with a composite cable
- Connecting an AV device with an HDMI cable
- Connecting a Headphone
- Connecting an Audio Receiver with a digital audio cable
- Connecting a USB device to the USB port
- Connecting to the Internet through a Wireless (WiFi) Device
- Guided Setup
- Benefits of connecting
- Setting up Antenna TV
- Using your TV
- Adjusting TV settings
- Searching for movies and shows
- Using the Roku Channel Store
- Customizing your TV
- Rearrange tiles
- Edit broadcast TV channel lineup
- Rename inputs
- Remove unwanted tiles
- Change themes
- Change sound effects volume
- Configure automatic power off
- Configure parental controls
- More settings
- Other devices
- Quick Problem-Solving Tips
29
VOLUME
DOWN
Turns volume down one setting with each press. Press and hold to turn
volume down rapidly. A volume indicator shows the volume level while
you are adjusting the volume and for a few seconds afterward.
Note: If the TV is muted, pressing VOUME DOWN does not unmute the
sound.
MUTE Mutes the TV sound. A volume indicator shows the current volume level
and a mute icon when you press MUTE and for a few seconds afterward.
If Closed captioning is set to When Mute, captions are displayed while
the TV is muted.
STREAMING
CHANNEL
SHORTCUT
Dedicated buttons show the logo of a featured streaming content
provider. Pressing a button turns on the TV, and if the TV is connected to
the Internet, performs one of the first two following actions:
• Displays the main page of the streaming channel if you have
already added the channel to your Home screen.
• Displays the sign-up page for the streaming channel if you have not
already added the channel so that you can agree to any terms and
fees for the service.
• If the TV is in ‘Standby’ mode (off), turns the TV on. And, if it is
connected to the Internet, the TV performs one of the first two
actions listed above.
Note: For information about using a Universal Remote, refer to the ‘Other Devices’ section on page 57.
Watching broadcast TV channels
To watch broadcast TV, select the Antenna TV tile in the Home screen. Your TV remembers the last
channel you watched and starts with that channel playing.
Tip: You also can use the buttons on the TV panel to select Antenna TV, as explained in "
TV
panel buttons” on page 25.
Changing channels
To change channels, you can do any of the following:
• Press [UP] to change to the next higher channel.
• Press [DOWN] to change to the next lower channel.
• Press [LEFT] to display the channel list, and then press [UP] and [DOWN] to move the highlight
through the list one channel at a time. Or press [REVERSE SCAN] and [FORWARD SCAN] to move
the highlight through the list one page at a time. When you’ve highlighted the channel you want
to watch, press [OK]. (If you decide you don’t want to change channels, press RIGHT or BACK).
• Press [ ] to jump to the previous channel. Press again to return to the channel you were
watching before you pressed [ ].