ES-G MANUAL DEL USUARIO Antes de utilizar el televisor, por favor lea este manual detenidamente y consérvelo para futuras referencias.
ES条形码定位框 35x10.
I
Important Safety Instructions The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. 16.
Important Safety Instructions 22. When you connect the product to other equipment, turn off the power and unplug all of the equipment from the wall outlet. Failure to do so may cause an electric shock and serious personal injury. Read the owner's manual of the other equipment carefully and follow the instructions when making any connections. 23. Sudden high volume sound may cause hearing or speaker damage.
Important Safety Instructions When Installing the TV Against a Wall or Enclosed Area Make sure that your TV has adequate air circulation. Allow enough space around the TV as shown below. Avoid operating the TV at temperatures below Inadequate air 41°F (5°C). Install with stand Install on the wall 12 inches (30cm) 4 inches (10cm) 12 inches (30cm) 4 inches (10cm) 2 3⁄8 inches (6cm) 4 inches (10cm) 4 inches (10cm) Leave at least this much space around the set.
Legal Notices FCC Statement Energy Star NOTE: Your Hisense TV is ENERGY STAR qualified in the “Home” mode. It meets strict energy efficiency guidelines set by the U.S. Environmental Protection Agency and Department of Energy. ENERGY STAR is a joint program of these government agencies, designed to promote energy efficient products and practices. Changes to certain features, settings, and functionalities of this TV (i.e. TV Guide, Picture, Sound) can increase or change the power consumption.
Contents Getting Started Viewing the Remote Control............................................................................. 2 Installing Batteries in the Remote Control........................................................ 3 Making Connections......................................................................................... 4 Basic Features Turning Your TV On or Off................................................................................ 7 Turning the TV for the First Time............
Getting Started Viewing the Remote Control Remote sensor Select input source Power on/off Select TV / AV / VGA / USB source Select HDMI source Select sound mode Set the sleep timer Adjust closed caption mode Display the current time MENU button TV USB Select picture mode HDMI PICTURE COMPONENT Select component source SLEEP SOUND ASPECT Zoom button CCD TIME MTS/SAP Audio select button Mono/Stereo/SAP operation Media content control function buttons FAV.
Getting Started Installing Batteries in the Remote Control Change the batteries 1. Slide the back cover to open the battery compartment of the remote control. 2. Insert two AAA size batteries. Make sure to match the (+) and ( - ) ends of the batteries with the (+) and ( - ) ends indicated in the battery compartment. 3. Close the battery compartment cover.
Getting Started Making connections NOTES Check the jacks for position and type before making any connections. Loose connections can result in image or color problems. Make sure that all connections are tight and secure. Not all A/V devices have the ability to connect to a TV, please refer to the user manual of your A/V device for compatibility and connections procedure. Always unplug the power cord when connecting external equipment. Connecting an antenna, cable or cable/satellite box 1.
Getting Started Connecting an A/V Device with Component (YPBPR) Cable 1. Use a component cable to connect the external A/V device’s component output jacks to the TV’s YPBPR jacks. Use an audio cable to connect the external A/V device’s component audio jacks to the Tv’s AUDIO (L/R) jacks. 2. Plug the connected devices into the mains socket before switching on the TV. 3. Select the corresponding source from the TV.
Getting Started Connecting a PC with VGA Cable 1. Use a VGA cable to connect the PC’s VGA output jack to the TV’s VGA jack. Use an audio cable to connect the PC’s audio output jack to TV’s PC/DVI AUDIO IN jack. 2. Plug the connected devices into the mains socket before switching on the TV. 3. Select the corresponding source from the TV.
Basic Features Turning Your TV On or Off If Auto selected, the options of Year/Month/Day/Time are not available. Setting the Time: Press [ / ] to select the number you want to set and press [▲/▼] to set. 4. Press [▲/▼] to select your Picture Mode: Home Mode or Retail Mode, press [ENTER] button to confirm. ▲ ▲ To turn your TV on or off (standby mode): 1. Plug the power cord into an AC power outlet. 2. Press [POWER] button. Your TV turns on. 3. Press [POWER] button again to turn off your TV.
Basic Features Selecting the Input Source Auto: Automatically adjusts the image based on the screen size and the TV program. The first time you turn on your TV, you must select the TV signal source. Your TV stores this information, so you do not need to change the TV signal source unless it changes. For example, you change from an outside antenna to cable TV. To select the video input source: 1. Turn on your TV, then press [INPUT] button on the remote or on the TV. The Input source menu opens. 2.
Basic Features To Use the Menu 1 Press [MENU] to open the main menu. 2 Press [▲/ ] to select a menu option, then press [ / Picture ▲ ▲ Picture Mode Brightness Contrast Color Tint Sharpness Advanced Video Reset Picture Settings ENTER] button to enter the menu. 3 In each menu, you can: ▲ ▲ ▲ Press [▲/ ] to select an item, Press [ / ] to adjust the value, or Press [ /ENTER] to enter the submenu, Press [MENU] to back the previous menu. ▲ ENTER 4 Press [EXIT] to exit the menu.
Basic Features Using the Audio Menu SAP: Depending on the particular program being broadcast, you can listen to a foreign-language translation. Audio Sound Mode Balance Equalizer Auto Volume Control TV Speakers Advanced Audio Reset Audio Settings ENTER Enter Select Standard 0 Audio Language (Digital channels only) - Change the default value for audio language. On On Reset Audio Settings - Resets all audio settings to the factory defaults.
Basic Features NOTE Closed Caption V When you press [CH /V] (or [CH +/-]) button, your TV skips the hidden channels. You can still tune to the channel by pressing the number buttons on the remote control. Caption Control Analog Caption Digital Caption Digital Caption Settings CC Off CC1 Service1 Favorite List - Display your Favorite List. You can add or delete channels to create your favorite list.
Basic Features ▲ Auto Adjust: Detects input signal clock, phase and position and adjusts TV display accordingly. ▲ Input Labels - Press [▲/ ] to select the input source you want to label, then press [ ] to move to the custom label field and then press [▲/ ] to select the character you want. When you have completed the label, The next time you press INPUT, your label will appear in the Input source list. ▲ H.Position: Move the image right or left. V.Position: Move the image up or down.
Basic Features Following is the description of these ratings. U.S.
Advanced Features Digital Media Player Enjoy Movie Files Please note that Hisense will not assume any responsibility for any lost data and cannot guarantee perfect compatibility with all mass storage devices. Be sure to insert the USB disk with standard USB 2.0 port. Data Input from USB Memory Stick only. Do not connect any device to this terminal such as digital camera, keyboard, mouse, etc. 1. Press [RED] button to switch the media type to MOVIE. ▲ 4.
Advanced Features Browse the Photos 1. Press [RED] button to switch the media type to PHOTO. ▲ ▲ ▲ 2. Press [▲/ / / ] to select the photo you want to view. 3. Press [ENTER] to browse the photo. 4. Press [EXIT] to return to the previous directory. ▲ 5. When browsing photos, press [MENU] button to display / exit the tool bar. Press [ /ENTER] to enter the submenu and press [EXIT] to return to the upper menu.
Advanced Features Playable Format List Video Decoder Support List File extension *.avi *.wmv *.asf Container AVI ASF *.mp4 *.mov MP4 *.3gp *.mkv MKV *.mpg *.mpeg *.vro *.ogm Video Decoder Resolution Bitrate (bps) MPEG1 768*576 1.8M MPEG2 MP@HL 1920*1080 40M MPEG-4 SP@HL 3.0 1920*1080 40M MPEG-4 ASP@HL 4.0 1920*1080 40M MPEG-4 SP@HL 3.0 1920*1080 40M MPEG-4 ASP@HL 4.0 1920*1080 40M MPEG-4 SP@HL 3.0 1920*1080 40M MPEG-4 ASP@HL 4.0 1920*1080 40M MPEG-4 SP@HL 3.
Trouble Shooting When there is something wrong with your TV, you can try turning off the TV and then restart it. You can also Operate according to the following chart. If the problem still cannot be solved, please contact the professional technicians. SYMPTOMS POSSIBLE SOLUTIONS No sound or picture. Check if the power cord is in the AC outlet and if it has electricity. Check if you have pressed [POWER] button on the TV or [POWER] button on the remote control.
Trouble Shooting SYMPTOMS POSSIBLE SOLUTIONS On some channels getting another language or sometimes no sound at all. That would indicate that the MTS mode on your unit is set to SAP mode. We suggest setting the MTS mode to either Stereo or Mono . For further instruction, please see Audio Adjust or MTS/SAP in your user manual. SAP is Second Audio Program. It’s a second audio channel that is usually used for a second language or descriptive audio for the visually impaired.
