User's Manual

4
Getting Started
Pairing the Remote
Using the Air Mouse and Voice Input
Installing Batteries in the Remote Control
Insert batteries into the remote control as shown.
1. To open the battery cover, push the latch in the direction of the Arrow and lift off the cover.
2. Insert two AA size batteries. Make sure to match the (+) and ( - ) ends of the batteries with the (+) and ( - ) ends indicated in
the battery compartment.
3. Close the battery cover.
The air mouse and microphone functions are available after the remote control is paired.
The First Method
The Setup Wizard menu appears the first time you turn on the TV. Step of the remote pairing, press and hold down the [Red]
and [OK] buttons simultaneously until the red LED turns on. When the red LED lights, release the buttons and wait for the TV
to pair with the remote. The blue LED on the remote control will flash three times when the pairing is successfully completed.
The Second Method
1. Enter
Settings > Bluetooth
to turn on
Bluetooth
.
2. Press and hold the [Red] button and [OK] button for three seconds simultaneously.
3. Select
Find nearby devices
to search the remote control, and the remote control will appear in available devices, then
press [▲/▼] button to select the Hisense Vision Remote Control and press [OK] to pair.
+
The remote control supports air mouse and voice input (requires remote control pairing).
Shake the remote control to turn on air mouse function, and press the direction key to turn off the function.
Press the Voice key to start Google Voice Search. You can input voice via the microphone of the remote control.
NOTE
The batteries shall not be exposed to excessive heat such as sunshine, fire or the like.