User's Manual

Install the wall mount bracket (not included)

If you wish to mount the TV on a wall, you must purchase a

wall mount bracket separately. However, before you begin the

manufacturer's instructions be sure to:

1. Remove the TV stand if you already attached it.

2. Place the TV face down on a clean, safe and cushioned

surface.

3. Place the spacers (not included) in the corresponding

bracket holes.

CAUTION:

• When attaching the wall mount, use the spacers

(provided by the third-party manufacturer) between

the TV and the bracket.

Bracket

(not provided)

Screw

(not provided)

Spacer

(not provided)

• To prevent internal damage to the TV and ensure it is

mounted securely, use fixing screws (not provided) that

are 9.5-11.5 mm in length when measured from the

attaching surface of the mounting hook.

Wall mount hole pattern VESA

(mm)

400 x 400

Wall mount screw size (mm) M6

Follow instructions provided with the wall mount bracket.

• If you are not sure of your ability to complete the installation,

contact a professional installer or service technician for

assistance. Hisense is not responsible for any damages or

injuries that occur due to mishandling or incorrect assembly.

• The selected screws are 9.5-11.5 mm in length when

measured from the attaching surface of the TV rear cover.

Note:

The diameter and length of the screws differ depending on the

wall mount bracket model.

The rear cover of the TV Spacer

Screw

Wall mount bracket

9.5 - 11.5 mm