User's Manual
5 6
Register Your TV to Receive Hisense News
Thank you for choosing this Hisense • Roku TV. This User Manual provides information about the numerous
features and easy-to-understand connect devices to your TV, attach the TV stand, complete the Guided Setup,
configure your settings, stream content and much more.
Because we value your business, we want to keep you in the know of ‘all things Hisense’. Using your mobile phone,
scan the first QR code to register your TV and the second QR code to access the Support page. Depending on the
make and model of your phone, you may need to download a QR code scanning application.
You can also access the Product Registration or Support page by visiting www.hisense-usa.com/support or
www.hisense-usa.com/support/productreg
Figure 1. Product Registration QR Code
Figure 2. Product Support QR Code
PACKAGE CONTENTS
Your package in which you purchased this Hisense Roku TV contains the following items:
• Hisense • Roku TV
• TV stand
• TV base
• Hisense Roku TV Quick Start Guide
• Important Safety Information and Warranty Card leaflet
• 2 AAA batteries for the remote
• Power cord
• Hisense Roku TV Enhanced Remote Control
• 8 Phillips screws (total): 4 (M5x
12mm); 4 (ST4x16 mm)
IMPORTANT: Look inside the styrofoam (within the upper and bottom parts of the box) to make sure that you have
removed all items that come with the TV.
REQUIRED TOOLS AND DEVICES
• Phillips screwdriver (not included) to attach the TV stand
• Wi-Fi device or Wireless router (not included) for Internet connectivity
Getting Started With Setting Up Your TV Getting Started With Setting Up Your TV
Lifting and Moving the TV
Installing the Stand
• We recommend that at least 2 people are available to lift and transport the TV.
• Before moving or lifting the TV, disconnect the power cord and all cables.
• When holding the TV, face the screen away from you to avoid damage.
• Hold the top and bottom of the TV firmly.
Follow the steps and illustrations below to install the stand.
Figure 4. Stand Installation steps
C
a. Secure the STAND COVER to the STAND
COLUMN with 4 screws.
b. Insert 2 (ST4) screws in the front and 2
(M5) screws in the back.
D
a. Align the BASE STAND with the screw
holes located on the bottom of the TV.
b. Secure the BASE STAND to the TV with
the four screws tightly.
BASE STAND
TV BACK
0hPP
6&5(:6
A B
Carefully place your TV on a soft, cushioned,
surface to prevent damage to the screen.
M5 x 12mm
Secure the STAND COLUMN to the BASE
with four screws.
BASE
STAND COLUMN
SCREWS
STAND COVER
STAND COLUMN
SCREWS
STAND COVER
STAND COLUMN
0hPP