User's Manual
7 8
Getting Started With Setting Up Your TV
Installing a Wall Mount Bracket (not included)
Your TV can be mounted on a wall using a wall mount bracket (not supplied) that can be purchased separately.
Before you begin the installation instructions provided by the wall mount manufacturer, we suggest that you do the
following things:
1. Remove the TV stand if you already attached it.
2. Place the TV face down on a clean, safe and cushioned surface.
3. Place the spacers (not included) in the corresponding bracket holes.
CAUTION
• Be sure to use the provider spacers between the TV and the bracket when attaching the mount.
• To prevent internal damage to the TV and ensure it is mounted securely, be sure to use fixing screws (not
provided) that are 9.5 - 11.5 mm in length when measured from the attaching surface of the mounting hook
• When you mount your TV on the wall or place it on furniture, maintain a distance of at least 4 inches between the TV and
other objects (walls, cabinet sides, and so on) to ensure proper ventilation andd prevent the TV from overheating.
• Do not mount the TV at more then a 12 degree tilt.
• Do not use screws that differ from the length and diameter that we have recommended.
• Do not fasten the screws too firmly. This may damage the TV or cause it to fall, leading to personal injury. Hisense is not
liable for these kinds of accidents.
• Be careful when you touch the TV. Some parts may be warm or hot.
• Do not place any type of fabric or papers underneath, on top of, or beside the TV. This can block ventilation and cause a fire.
• For detailed information about installing the wall mount bracket, see the third-party manufacturer’s instructions or contact a
professional installer for assistance.
• Do not operate or handle the TV with wet hands
Follow instructions provided with the Wall-Mount bracket.
• If you are not sure of your ability to complete the installation, contact a professional installer for assistance.
Hisense is not responsible for any damages or injuries that occur due to mishandling or incorrect assembly.
• The screws that we recommend are 9.5-11.5 mm in length when measured from the attaching surface of the TV
rear cover. The diameter and length of the screws differ depending on the Wall-Mount Bracket model.
Leave at least this much
space around the set.
Leave at least this much
space around the set.
4 inches
(10cm)
4 inches
(10cm)
4 inches
(10cm)
4 inches
(10cm)
4 inches
(10cm)
2
3
8
inches
(6cm)
12 inches
(30cm)
12 inches
(30cm)
Correct way to attach the TV stand Correct way to attach the wall mount bracket
Wall Wall
Air circulation is blocked.
Figure 5. Correct way to attach the TV
stand
Figure 6. Correct way to attach the wall mount
bracket
Locating Ports and Buttons on Your TV
Locating Ports and Buttons on Your TV
Figure 8. Side, Bottom and Button View of the
Hisense Roku TV
USB
HDMI 3
DC 5V 0.5A(MAX)
HDMI 2
TV Bottom View
TV Side View
Button View
HDMI 1(ARC) VIDEO L
AV IN
R
Ant/Cable
/AUDIO
OUT
DIGITAL
AUDIO OUT
AC power cord