User Guide Bluetooth Handsfree Car Kit MODEL:HB600
Table of Contents Thank You Safety Guidelines Introducing the HB600 What Your Speaker can do Specifications Charging Your Speaker GETTING STARTED Pairing with Your Phone Thank you 3 3 6 5 7 7 8 9-10 How to Answer a Call End a Call Make a Call Reject a Call* Activate Voice Dialing* Redial Last Number* Adjust Sound and Volume Call Waiting and Placing a Call on Hold* Reject Call Waiting Mute Function Call Transfer From The Speaker To Mobile Phone 11-12 What the Lights Mean Restore Fa
or ringing in your ears, immediately discontinue using the speakerphone and consult a physician. With continued use at high volume, your ears may become accustomed to the sound level, which may result in permanent damage to your hearing without any noticeable discomfort. 3. Drive Safely Several studies have shown that cell phone usage while driving creates a distraction to the driver which may increase the likelihood of an accident.
Introducing the HB600 What your speaker can do 1. 2. 3. 4. 5. 6.
Charging Your Speaker Pairing with your phone or other device Make sure that your Hisense HB600 speaker is fully charged before first use (normal charging time is approximately 3 hours). Use the AC adaptor to charge from a power socket, or charge directly from you’re your car power outlet using the charging cable provided After connecting to the power source, the red LED will flash while charging. After charging ends the red LED will turn off.
. Your phone will then ask if you want to pair with it. Accept by pressing ‘Yes’ or ‘OK’ on the phone and confirm with the passkey or PIN = 0000 (4 zeros). Your phone will confirm when pairing is complete. In case of unsuccessful pairing, repeat steps 1 to 6. Note: If the pairing cannot be completed within 2 minutes after the pairing mode is activated, the speakerphone will power off automatically. Please repeat steps above to pair the speakerphone and mobile phone again.
Call Transfer from Speaker to Mobile Phone Press the volume (+) and volume (-) buttons together. The conversation will be route to the mobile phone. In order to route the conversation back to the speaker, press again the volume (+) and volume (-) buttons together Functions marked with * are dependent on your phone supporting these features. Check your phone’s user manual for further information.
Troubleshooting Taking Care of Your Speaker I hear crackling noises For the best audio quality, make sure that the mobile phone is placed within 10 meter from the speaker. I cannot hear anything in my speaker Increase the volume on the mobile phone. Ensure that the Speaker is paired with the phone. Make sure that the phone is connected to the speaker – if it does not connect from the phone’s Bluetooth menu.
profile, a phone manufacturer must implement certain mandatory features within the phone’s software. 3. Pairing creates a unique and encrypted link between two Bluetooth devices and lets them communicate with each other. Bluetooth devices will not work if the devices have not been paired successfully. 4. Passkey or PIN is a code that you enter on your mobile phone to pair it with your Hisense HB600. This makes your phone and the Hisense HB600 recognize each other and automatically work together.