R LCD COLOUR TV USER'S MANUAL LCD 2003EU Part No: IES041104 English
Please read all the safety and operating instructions carefully before you begin. SAFETY CLASS This is an IEC safety class product and must be grounded for safety. CONTENTS Brief operating instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Important safeguards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
OSD language Settings When you start using your set for the first time, the Option menu will be displayed on the screen as shown on the right. 1.Press the [ or ] button to select the OSD language . 2.Press the [ or ] button to select the language that you want to use. Equalier Option OSD language Teletext lang Teletext E/W VCR Mode Reset Menu Auto Search English Pan European West On Off Notes: The Option menu is only displayed once when you turn on the TV.
Brief Operating Instructions 1.Connection Connect the antenna lead or CATV cable or external equipments (such as Antenna, Cable TV, VCD, DVD, VCR, Set top box, etc.) to the corresponding terminals or interface on the TV rear (please refer to the owner s manual of the equipment to be connected as well) and confirm that the signal source is available and works normally. ANT.IN 2.
3.Switching on/off 1)Connect the TV to power outlet, if the power indicator is red, it means the TV is off now. You need to press the POWER switch or the POWER button on the remote control to turn on the TV, and the power indicator will display blue. 2)Press the power switch or the POWER button on the remote control to turn off the TV. 4.Signal source selection 1)Press the number [1-9] button or CH+ or CH- button to select TV input; 1)press the SOURCE button to enter the Source menu.
The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product ' s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER(OR BACK).NO USERSERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Learning about your new TV You can operate your TV by using the buttons on the front panel or the remote control. The terminals on the front and the back panel provide all the connections you will need to connect other equipment to your TV. Front Controls MENU TV/AV VOL 10 VOL CH CH 7 8 Back Connections 9 21 20 ANT.
Learning about your new TV Channel down / cursor down Channel up / cursor up Volume down / cursor left Volume up / cursor right TV / AV / PC input select MENU button POWER button (standby) POWER indicator Remote Sensing Window Headphone jack CATV antenna input AV audio input L AV audio input R S-Video input AV Video input Y PB/CB P R /C R input PC VGA input POWER Plug 9 Wall mounting locating hole 20 SCART 21 Power switch Selecting a location for the TV 1)Place the TV on the floor or on a sturdy platform
Connecting your TV NOTE: 1) Headphones are not included. 2) No sound will be heard from the main unit speakers when a headphone mini-plug is connected into the headphone jack. Headphone Connecting the PC You can use your TV as a monitor for your PC by connecting through its 15pin standard RGB interface. Connect the devices as shown below. PC PC IN To VGA RGB line NOTE: The refresh rate of your PC must be adjusted to 60Hz.
Using the remote control Preparing the remote control for use + + Installing the remote control batteries 1. Open the battery cover on the back of the remote control. + + 2. Install two AAA size(1.5V) batteries. Match the + and - signs on the batteries to the signs on the battery compartment. 3. Close the battery cover. 30 6m 30 Note: 1.Dispose of your batteries in a designated disposal area. Do not throw your batteries into fire. 2.
Shortcut keys operation Connecting POWER Notes:1.Use a commercially available AC plug , if necessary, depending on the design of the wall outlet. 2.Always release the AC power switch or remove the AC power plug from the outlet when not using for a long period of time. ON/OFF Standby Press POWER on the remote control to turn off the LCD TV, the POWER indicator will turn red. Press POWER again to turn the LCD TV back on, the POWER indicator will turn blue. Selecting the signal source 1.
Shortcut keys operation Adjusting sound volume Press VOL- or VOL+ on the remote control or VOL segment of the indicator will decrease or increase. on the TV to decrease or increase the sound volume. The Muting the sound Press the MUTE on the remote control to temporarily turn off the sound. To restore the sound, press MUTE again. The mute function is automatically turned off when any of the following buttons are pressed: POWER, VOL+. Changing channels To change the channel, you can 1.
Shortcut keys operation Selecting the picture mode You can select the picture quality instantly from among three preset modes and one user-set mode. Press the P.MODE button on the remote control repeatedly to select the desired picture quality. P.MODE Normal User Soft Bright Selecting the sound mode You can select the sound effect instantly from among three preset modes and one user-set mode. Press the S.MODE button on the remote control repeatedly to select the desired sound effect. S.
Menu operation Using the Picture Parameters menu Adjust picture settings Picture Parameters Equalier 1) Press the MENU button to enter the main menu. 2) Press the [ or ] button to select the item Picture Parameters, and ] button to enter Picture Parametersmenu. press the [ 3) Press the [ or ] button to select the item you want to adjust. 4) Press the [ or ] button to adjust the level. 5) The adjusted data is stored automatically in the user mode. NOTE: 1) The disabled items will disappear.
Menu operation Using the Geometry menu Geometry 1) Press the MENU button to enter the main menu. 2) Press the [ or ] button to select the item Geometry, and press the [ Press the [ or ] button to select the item you want to adjust. Press the [ or ] button to change the value. ] button to enter Geometry menu. Geometry Equalier H Clipping: The item allows you to extend or shorten the TV image in the horizontal direction. H Position: The item allows you to move the TV image in the horizontal direction.
Menu operation Option 1) Press the MENU button to enter the main menu. 2) Press the [ or ] button to select the item General Settings, and press ] button to enter General Settings menu. the [ 3) Press the [ or ] button to select item Option. 4) Press the [ or ] button to enter the Option menu. Press the [ or ] button to select the item you want to adjust. Press the [ or ] button to change the value. OSD Language: Press the [ or ] button to change the OSD Language.
Menu operation Using the Search menu Colour System Equalier Search You can set colour system for different valid input signal. 1) Press the MENU button to enter the main menu. 2) Press the [ or ] button to select the item Search, and press ] button to enter Searchmenu. the [ 3) Press the [ or ] button to select Colour System. 4) Press the [ or ] button to toggle between Auto, PAL and SECAM.
Appendix Cleaning and care WARNING: TV sets use high voltage. Do not try to remove the cabinet back. Refer servicing to qualified service technicians. To clean the TV screen: 1) Unplug the TV to avoid possible shock hazard. 2) Use a damp cloth or clean cellulose sponge to clean the TV screen and trim. Do not allow water to spill into the cabinet or damage may occur. 3) Wipe off any excess moisture with a clean dry cloth.
Appendix Troubleshooting Before calling a service technician, please check the following table for a possible cause of the problem and some solutions. Problem Solution TV will not turn on Make sure the power cord is plugged in, then press POWER. The remote control batteries may be dead. Replace the batteries. No picture, no sound Check the antenna/cable connections. No sound, picture OK The sound may be muted. Press VOL+. The station may have broadcast difficulties. Try another channel.
Appendix The SCART interface Also known as Peritel, this standard provides a cheap multi-signal connector to domestic TV and other video equipment. Caution:The output of video and svideo are always from turner of R F. Scart Connector Pinout Details SCART arrangement Pin Signal Signal level Impedance 1 Audio output B (right) 0.5V rms <1kohm 2 Audio input B (right) 0.5V rms >10kohm 3 Audio output A (left) 0.
Appendix Specifications LCD2003EU LCD panel 20.
