R COLOUR PLASMA DISPLAY TV USER'S MANUAL PDP5010EU Part No:
OSD Language Settings Using the GENERAL SETTINGS menu OSD LANGUAGE CHANGE PASSWORD GENERAL SETTINGS LANGUAGE ENGLISH
The symbol of the dustbin barred means that this apparatus cannot be put at the rebus with not sorted waste domestic running. It is interdict to throw with not sorted waste domestic running, of deposited on the public thoroughfare or at any other place not envisaged to this end. This apparatus contains substances being able to be harmful for the environment. The presence of certain substances can have harmful effects on the environment.
Selecting a location for - 3-
Preparation for Using your new TV MENU button Connecting your TV Caution: Do not plug the TV in until you have finished connecting all of your equipment. Connecting to A/V equipments To enjoy its multimedia features, you can connect your TV to A/V equipments such as VCR, DVD, STB, Satellite receiver, Camcorder, Audio amplifier etc., and select signal sources using your remote control. Connect the devices as shown below. Notes: Please pay attention to the relationship between Video Port and Audio Port. .
Preparation for Using your new TV Connecting to A Computer You can use your TV as a monitor/speakers for your computer by connecting through its 15pin standard RGB interface and PC audio interface. Connect the devices as shown below. Connecting to an antenna To enjoy the terrestrial signal transmitted by your local TV station, you need an indoor or outdoor antenna (not supplied). Perfect picture quality requires a good signal and generally means that an outdoor antenna must be used.
Using the remote control Preparing the remote control for use Installing the remote control batteries 1. Open the battery cover on the back of the remote control. 2. Install two AAA size(1.5V) batteries. Match the + and - signs on the batteries to the signs on the battery compartment. 3. Close the battery cover. Note: 1.Dispose of your batteries in a designated disposal area. Do not throw batteries into fire. 2.Do not mix battery types or combine used batteries with new ones. 3.
Using the remote control Learning about the remote control 1 Power : Power on/off PIP Sub.Ch. Swap Main Ch. 1 Channel Number :Direct channel selction Red/PIP : Fast text/ Select the OFF/PIP/POP Mode Green/Sub.Ch.: Fast text / Select Sub. Picture source Yellow/Swap : Fast text /Swap between Main and Sub.picture Blue/Main Ch. : Fast text / Select Main. Picture source Recall : Return to previous channel Display :Display current channel number or input mode P.Mode: Select picture mode S.
Using the TV features Understanding the TV features Multimedia - TV receiver, Video monitor and PC display, all in one. Wider viewing angle, 16:9 display - over 160 viewing angle, 16:9 ergonomical display panel Digital display device - truthfully reproducing the images, without distortion or blurring, irrespective of magnetic or geomagnetic effect. 200 channels storage Sleep timer Teletext with 252 pages memory NICAM Dual SCART interface Multi-language OSD Basic Operations Power ON/OFF 1.
Select channels by numbers To select a channel : Press the channel numbers in series to select channel directly. For example, to seclect channel 120, Press the button 1, and 1_ _ will display on the top right corner of the screen, then press the button 2, 12_ will display, press the button zero, you can enjoy the program of channel 120. NOTE:1) When you changing the channel, the sound state, colour system state& sound system state graphics can be displayed below the channel number.
Using the TV features Using the CHANNEL menu CHANNEL NUM CHANNEL 1) Press the
Using the TV features Using the PICTURE menu PROGRAM Adjust picture settings 1) Press the
Using the TV features Using the PIP menu PICTURE IN PICTURE 1)Press the
Using the TV features Using the GENERAL SETTINGS menu GENERAL SETTINGS OSD POSITION 1) Press the button to enter the main menu. 2) Press the or button to select the item GENERAL SETTINGS. 3) Press the or button to select OSD POSITION and press enter it . 4) Press the or button to adjust the OSD POSITION. 5) Press the
Using the TV features Teletext Operations ENTER TELETEXT MODE Select the channel that is broadcasting the desired Teletext program. Press < Text> button on the remote control to enter the Teletext mode ,and press the same button quit the Teletext mode.. Note:1)All the operations the below should be under the Teletext mode. 2)There are some multiplex buttons on the remote control for Teletext operation. PAGE SELECTION You can directly input your desired page number by pressing <0>~<9> buttons.
Appendix Scart connector See Signal Source Selection on page 8 for selecting SCART input.
Appendix Troubleshooting Before calling a service technician, please check the following table for a possible cause of the problem and some solutions. Symptoms Possible Solutions TV will not turn on Make sure the power cord is plugged in, then press . The remote control batteries may be dead. Replace the batteries. No picture, no sound Check if you have set the off timer. Check the antenna/cable connections. Press [Display] to see if you have select the right signal source.
Specifications Diagonal display size 50 INCHES PDP Television system Multi- standard(PAL,SECAM) Channel coverage VHF-L: E2-S8 VHF-H: S9-S37 UHF: S38-E69 Resolution 1366X768 Contrast 2500:1 Brightness 1000cd/m Viewing angles 170 (H)/170 (V) Power source AC100V--240V, 50/60Hz Power consumption 500W Audio output 7W+7W RF input: VIDEO input: Connection interface o 2 o Cable/ Antenna RF 1 VIDEO 1 YPbPr/YCbCr 1 GRAPHIC input: Analog RGB 15pin 1 Digital RGB(DVI-D) X1 SCART INPUT: SCART1 (CVB
