User's Manual

WARNING:

Placing a heavy object on the phone or sitting on it can

damage the LCD and touch screen functions. Do not

cover the LCD proximity sensor with protective film. This

could cause the sensor to malfunction.

Installing the SIM/SD card

Before you can start exploring your new phone, you'll

need to set it up.

To remove the back cover, hold the phone firmly in one

hand. With your other hand, lift off theback cover with

your thumbnail.

Slide the SIM/SD card into the corresponding slot as

shown in figure.,make sure the gold contact area on the

card is facing downwards.

Note:

1. Your phone only supports Micro-SIM cards. Do not

attempt to insert other SIM type like Nano cards,

otherwise this may cause phone damage.

2. Please do not remove the SIM/SD card while the card

is in use; otherwise, data loss or damage may occur.

Hisense shall not be liable to any loss, including data

loss, due to misuse of an SIM/SD card.

3. Please turn off your mobile phone before replacing or

removing its SIM/SD card.

4. SD card is not included, you need to buy separately.

Charging the battery

Charging Battery

1. Insert the large end of the USB cable into the mobile

phone charger and insert the small end into the mobile

phone USB slot, while paying attention to the

orientation of the USB plug.

2. Insert the charger into a 100~240V 50/60Hz outlet to