Quick Setup Guide Before using the TV, please read this guide carefully and keep it for future reference. Disclaimer: This Quick Setup Guide is intended as a general guideline to help you set up your TV. Images throughout this document are for illustrative purposes only and may differ from the actual product.
© 2021 Hi sense Company Ltd. All Rights Reserved. All material in this Quick Setup Guide is the property of Hi sense Company Ltd. and its subsidiaries, and is protected under US, CANADA, MEXICO and International copyright and/or other intellectual property laws. Reproduction or transmission of the materials, in whole or in part, in any manner, electronic, print, or otherwise, without the prior written consent of Hi sense Company Ltd. is a violation of Hi sense Company Ltd.
Congratulations on the purchase of your new TV! This Quick Setup Guide will walk you through a few easy steps to set up your TV. Table of Contents Register Your TV! 2 Important Safety Information 3 Packaged Contents 5 Laser TV Diagram 6 STEP 1. Mount the Screen 7 STEP 2. Set up the Laser TV 7 STEP 3. Adjust the Display Image and the Screen 0 STEP 4.
Register Your TV! Because we value your business, we want to keep you in the know of ‘all things Eisenstein. Using your mobile phone, scan the Registration page QR code to register your TV. Depending on the make and model of your phone, you may need to download a QR code scanning app. Mexico se HTTP: /www.hisensecanada.
Important Safety Information Marne WARNINGS Do not look directly at the lens when this device Is onl * This product comes with a laser module. Do not tear or modify this device in any manner; otherwise, it may result in personal injury.
+ If this device has been in a warm environment, allow any built-up condensation to evaporate first BEFORE you switch the device on. + Do nat allow a child to stand on or climb up this device. + Do NOT place any object above or in front of the lens because the laser light could cause the object to become flammable. + Clean the lens periodically with a clean cloth and make sure the TV is turned off before you start.
Packaged Contents + Laser TV + 1 Audio Qut Cable + 1 Remote control + Hi sense 4K Laser TV Quick Setup Guide + 2 AAA batteries + Important Safety Information & Warranty Card + 2 pairs of gloves for handling the Laser TV + Cleaning kit for the lens + 1 Power Cord + 2 C-shaped blocks + 1 Wrench to adjust the bottom of the TV + C-shaped Block Installing Instruction ADDITIONAL ITEMS THAT COME WITH THE TV IN A SEPARATE PACKAGE + A Display Screen {optional equipment)” + A set of Wall Mount Brackets (optional equi
Laser TV Diagram Power Indicator Remote contra receiver Eye protection sensor Lens with laser {Power button Foreign Object Detect We strongly recommend that two people handle this device when moving it from one place to another. Be sure to protect the lens when you handle this device.
STEP 1 Mount the Screen If you purchased a screen from Hi sense to include with your Laser TV, then refer to the Screen Installation Guide that's included in the package. STEP 2 Set up the Laser TV To begin setting up the Laser TV, we strongly recommend that TWO people move it from one place to another because of the weight. Be sure to protect the lens when you handle this device. 1 Now, to get started, we recommend that you connect all cables to the ports on the back of the Laser TV before you position it.
Parts to connect certain cables to Ethernet (you will need a router for Internet connectivity) External AV devices HDMI USB devices for browsing photos, music and | 4 | moves. This unit only recognizes USB Memory | Set top Box r : sicks. } : : Video Camera | Sat elite Relevance i ® — [pen dl 1 Outdoor VHF/UHF antenna 3 Coaxial EGGHEAD Antenna ANT OUT Check to ensure that you have selected the right cables for the ports and that they are connected securely.
It may be used to connect to a home automation system or Custom Integrated Audio/Video (A/V) system. It is recommended that it should only be completed by a professional installer. NOTE: ‘When connecting a hard disk or a USB hub, always connect the mains adapter of the connected device to the power supply. Exceeding a total current consumption may result in damage. The USB2.0 device maximum current consumption is 500mA. The USB3.0 device maximum current consumption is 1A.
STEP 3 Adjust the Display Image and the Screen Follow the steps in the order shown below, only if they apply to your situation. Note: Before adjusting, fold the wall-mount bracket wands so that screen is vertically level. Rotate feet from an overlooking view, but do not look directly at the lens when this device is on because the laser light may damage your eyes.
+ If the bottom of the image is wider than the screen, then move the Laser TV closer to the screen. If the bottom of the image is narrower than the screen, then move the Laser TV farther from the screen. bd NOTE: Make sure the bottom of the image always stays parallel with the screen. If not, rotate the TV following previous instructions. ADJUST THE UPPER-RIGHT CORNER OF THE IMAGE 1.
4. If the upper-right corner is inside the screen after adjusting, use the wrench to rotate the front-right foot and the back right foot counterclockwise to the same height, and rotate the TV clockwise, to make the image parallel with the screen. ADJUST THE UPPER-LEFT CORNER OF THE IMAGE 1. If the top of the image is higher on the left and lower on the right, then use the wrench to rotate the front-left foot and the back-left foot of the TV clockwise to the same height. A back-left foot front-elf foot 2.
FILL THE TOP OF THE IMAGE TO THE SCREEN If the top of the image is wider than the screen, then use the wrench to rotate the left and right-front feet of the Laser TV clockwise. = oo If the top of the image is narrower than the screen, then use the wrench to rotate the left and right-back feet of the Laser TV clockwise, until the left and right borders of the image are parallel with the screen borders. Next, move the projector further from the screen to fill the image to screen width.
STEP 4 Use Your Remote O Power on/off oO Display the Home screen Enter Channels/input numbers and ACH 123 special function buttons Press to Mute or restore sound oq Press and hold to display Accessibility menu OK Confirmation button MEDIA Quick access to Media Press to enter Menu 2 Press and hold to pair the Bluetooth remote NOTE: The button descriptions are only provided as a reference. The actual appearance of your remote may differ from the buttons that are listed.
1. Press and slide the back cover to open the battery compartment of the remote control. 2. Insert two AAA size batteries. Make sure to match the and ends of the batteries with the and ends indicated in the battery compartment. 3. Restore the battery compartment. IMPORTANT INFORMATION ABOUT THE REMOTE AND BATTERIES + Discard batteries in 2 designated disposal area. Do nat throw them into a fire. + Remove old batteries immediately to prevent them from leaking into the battery compartment.
STEP 5 Proceed through the Screen Setup Menu PROJECTION MODE If you need to flip the image over top-to-bottom and/or left to-right, select the Projection Mode and press the UP/DOWN buttons. AUTO GEOMETRIC CORRECTION Before you use Auto Geometric Correction function, ensure that the Laser TV and your mobile device are connected to the same WI-Fi network. 1. Position the Laser TV and use the leveling feet as needed to fit the entire display border within the screen area. 2. Click Next to continue. 3.
Begin to Enjoy Your TV Your Smart TV is easy to use and brag-worthy! After you've completed setting up the language, time and network connection, the Home screen will be your starting point for navigating the TV. Gone are the days where your TV only provides one way for you to be entertained. This showpiece provides you the convenience of watching a program on a live channel, accessing Video on Demand to watch a movie and many other entertainment options.
Maintenance + Do nat touch this device when it is running or just turned off because it may be hot. + Do not wipe this device with oil because it may deteriorate the exterior or damage the paint. Contact with rubber or ethylene products for a long time may cause stains on this device. + If the outside of the TV is dirty, tum off the TV and wipe with a damped soft cloth. + Do nat touch the lens with your hands. + Do nat touch or wipe the lens with ordinary cleaning cloth.
I have connected an external source to my TV and | get no picture and/or sound. 1. Check for the correct output connection on the external source and for the correct input connection on the TV. 2. Make sure you have made the correct selection for the input mode for the incoming signal. The picture is normal but there is no sound 1. Check the volume settings. 2. Check if ‘Mute’ mode is set to On. Sound but no picture or black and white picture 1.
The remote control does not work 1. Confirm that TV still has power and is operational. 2. Change the batteries in the remote control. 3. Check if the batteries are correctly installed. NEED MORE HELP? Additional help is available online at support links. You will find answers to frequently asked questions, downloadable firmware and more. If the problem is still not resolved, then contact us at one of the phone numbers below. US.A.
Product Specifications MODEL NAME 100L9G DIMENSION 24.0 x 61% 13.6 inches {610 x 155 x 346 mm) WEIGHT 247 los (1.
RECEIVING CHANNELS VHF: 2-13, UHF: 14 69, CATV: 1-125 Digital Terrestrial Broadcast (8VSB): 2 69 Digital cable (64/256 QA: 1-135 TUNER TYPE Frequency synthesized RECEIVING SYSTEM Analog: SCENT Digital: ATSC/QAM Disclaimer: All products, product specifications, and data are subject to change without notice to improve reliability, function, design or otherwise.
Certification and Compliance FCC Notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
