4K HDR Sal Quick Setup Help Hi sense improve the environment by reducing paper waste. For detailed instructions and feature descriptions, access the full User Manual online. Before using the TV, please read this guide carefully and keep it for future reference.
Copyright statement © 2021 Hi sense Company Ltd. All Rights Reserved. All material this Quick Setup Guide is the property of Hi sense Company Ltd. and its sul arise, and is protected under the laws of the US, Canada, Mexico and international copyright and/or other intellectual property laws. Reproduction or transmission of the materials, in whale or in part, in any manner, electronic, print, or otherwise, without the prior written consent of the Hi sense Company Lid.
This Quick Setup Guide supports the following models: 43A6G / 43A68G / S0A6G / 50A68G / 55A6G / 55A68G / 60A6G / 60A68G 165A6G / 65A68G / 7T5A6G / 75A68G Table of Contents What's in the box. Getting started Step 1. Attach stand or Step 2. Connect devices to your TV Step 3. Get your remote Step 4. Power on the TV Step 5. Complete the first-time Step 6. Establish a network Step 7. Enjoy your TV! Troubleshooting Product Specifications Certification and Compliance.
Congratulations on the purchase of your Hi sense TV! If you would like to know 'all things Eisenstein, contact us using the support info: The model and serial number of the TV is located on the back and/or on one side of the TV. We recommend that you record this if you ever need service. Customer Care Hi sense Support . Center Page Register your TV «= Phone: 1-888-835Awww. hi sense-usa.
What's in the box Your Hi sense TV comes with the following items: Tv = Quick Setup Guide (this document) 1 set of batteries » 2 base stands remote control = Important Safety Information and Warranty Card 1 RCA jack to AV cable cm/190.5 om) 4 screws (M4x16 for cm) 4 screws (M4x12 for cm/139.7 cm) 4 screws (M512 for cm/165.1 cm/190.5 om) power cord cm/127.0 cm/139.7 cm/166.1 cm/190.
Getting started Step 1. Attach stand or mount Before you start using your TV, attach your TV stand or mount it on the wall. CAUTION: + Disconnect the AC power cord before installing a stand or a wall mount bracket. + The LED display on your TV is fragile. Make sure the TV screen is not scratched or damaged by hard objects or from pressure. + After the installation is complete, make sure the TV is steady on a table or firmly attached to a wall mount, before removing all protective film, if any.
Note: If your table is long enough to place the TV on top of, then insert the base stands into the screw holes ‘A’ that are shown in the illustration. if your table is NOT long enough, then insert the base stand into the screw holes ‘B’ that are shown in the illustration. Note that these two installation methods types cannot be mixed. 65" (165.1 cm) Base Stand Screws: Screws: Base Stand Base Stand M5%12 Base Stand M5%12 75" (190.
Attach the wall mount bracket {not Included) Before you begin the third-party manufacturer instructions, be sure to do the following things: 1. Place the TV face down on a clean, safe and cushioned surface. 2. Remove the TV stand if you have already attached it. 3. Place spacers (not included) in the corresponding bracket holes. : Bracket CAUTION: (interluded) not Included) + Follow instructions provided with the wall mount bracket.
Step 2. Connect devices to your TV Check to ensure that you have connected right cables for right ports securely. Loose connections can affect the quality of the picture image and color. (109.2 cm/127.0 cm/139.
(165.1 cm/190.
Brief De label Pol able External Equipment ascription HEADLAMP Artisan Connect an acne © EEE ® | outdoor VHF or UHF antenna. Connects High Definition Multimedia Interface HOMO = t===a0l (HDMI) cable from an textual aed device. 7 vibe, @ | eae aE] Yellow & DVD Placeholder | — Nn Video Box Connect tte dso ssp 22 composts 9 video cable ‘Satellites Caterer and left-right R | ® audition cables from an q] textual AV oR) device. AN © Write) Connect an optical cable from an external digital audio system.
Brief label Pu le Textual Equip me iPhone Connect headphones p to hear audio from the TV. » Headphones with microphones are not supported. HEADPHONE Connect a USB device for browsing photos, music and movies. use = EJ Hard disks with a foal currant consumption or Impulse current consumption greater than 500mA are not supported. Connect an Theme cable to access a network or the Interment. The TV also has. a wireless connectivity feature.
Step 3. Get your remote ready The following table shows the buttons on your remote control and describes what they are for.
App Quick access buttons to apps NOTE: Buttons listed here are for reference only. Actual remote control models may vary. Insert the battledores 1. Take off the back cover to open the battery compartment of the remote control. 2. Insert two size batteries. Make sure to match the and ends of the batteries with the and ends indicated in the battery compartment. 3. Restore the battery compartment cover. Important Information about the remote and batteries + Discard batteries In a designated disposal area.
List of codes for the most common Cable and Satellite providers ars listed below. Use the code that Is associated with your Cable or Satellite provider (if applicable).
Step 4. Power on the TV Plug the power cord into a power outlet. cm) Connect your power cord to the TV and plug it into a power outlet. (109.2 cm/127.0 cm/139.7 cm/165.1 cm/190.5 cm) Your TV will display a launch screen showing the Hi sense logo. (109.2 cm/127.0 cm/138.7 cm/165.1 cm/190.5 cm) Wall Outlet Step 5. Complete the first-time setup The first ime you tum on your TV, there is a guided setup to make it easy to connect your TV to the Interment and complete the setup of your TV. Step 6.
Establish a wired network connection Automatically obtain an IP address 1.1f you connect to the wired network, the TV will automatically obtain an IP address and connect to the network. NOTE: Tha default option of IP Settings Mode is CPD. 2.1f the connection fails, "Not Connected” will display for the Ethernet status. Retry or enter the IP settings, and select Static to input the information again. Manually enter the IP address 1.Enter the IP settings to select Static. 2.
Step 7. Enjoy your TV! Now that you've completed the first-time setup, your Home screen is your starting point for using your TV. Your Hi sense TV provides a variety of entertainment options, so you'll always find something new. Use your TV to watch live channels, access video on demand to watch movies, and much more. Press the Home button on your cremate to get started. and Video Description functionalities on TV Text-to-Speech (TTS) and Video Description can help you to navigate the menus.
Troubleshooting I you are having trouble with your TV, first try muting it off and on again. If this doses not fix the problem, check the tips in the following table. If your problem is not listed in the following table, then contact us at one of the phone numbers on Page 2. Possible solutions » Check if the power cord is plugged into a powered AC outlet. = Press the Power button on the remote control to activate the unit from 'Standby’ mode. + Check to see if the LED light is on or not.
Product Specifications 43A8G 50A6G Morel Name 434686 504686 ut Stand. 37.9 x 22.0 x 29 inches. 44.0 x 25.4 x 29 inches x (963 x 560 x 74 mm} {1117 x 646 x 74 mm) 37.9% 24.2 x 7.7 Inches 44.0 x 27.9 x 8.9 Inches (963 x 614 x 196 mm) {1117 x 709 x 225 mm) ht out Sf 15.0 Ibs (6.8 kg} 21.6 Ibs (8.8 kg) 15.2 Ibs (6.9 kg) 22.0 Ibs (10.0 kg) x $2.9 x 7.7 inches 38.0 x 8.9 inches (835 x 196 mm) (964 x 225 mm) jade 43" (109.2 cm) 50" (127.0 cm) Screen ag 42.5 Inches (107.9 cm) 49.5 Inches (125.
Product Specifications 55A8G DACHA Morel Name 554686 50A68G but Stand. 48.65 x 28.0 x 2.9 inches. 53.3 % 30.7 x 2.9 inches. x (1233 x 711 x 74 mm) (1353 x 780 x 74 mm) 48.5 x 30.4 x 8.9 Inches 53.3 x 33.2 x 11.5 Inches (1.233 x 773 x 226 mm) {1353 x B43 x 292 mm) ht out St 24.9 bs (11.3 kg) 32.0 Ibs (14.5 kg) 25.4 bs (11.5 kg) 32.4 Ibs (14.7 kg) x 30.8 x 8.8 inches 42.3 x 11.5 inches {1012 x 226 mm) {1074 x 262 mm) 55" (139.7 cm) 80" (152.4 cm) Diagonal) 54.6 inches (136.7 cm) 60.1 inches {152.
Product Specifications Tuner Type 65A6C 75A66 Model Name 65A680 75A686 pros] oil Sim rd 57.2 x 32.8 x 2.8 inches 66.0 x 38.0 x 3.3 inches (1452 x 834 x 74 mm) {1677 x 966 x 85 mm) 672x353x clinches | 66.0 x 41.0% 14.1 Inches (1452 x 896 x 201 mm) {1677 x 1041 x 357 mm) nA Stand 36.4 Ibs (16.5 kg) 57.3 Ibs (26.0 kg) Stan 36.8 Ibs (16.7 ka) 58.4 Ibs (26.5 ka) Bi ) 25.3% x 11.5 inches | 23.7 x x 14.1 inches (642 x 2011 277 x 291 mm) | (603 x 357/1 160 x 357 mm) Cis 65" (185.1 cm) 75° (190.
Certification and Compliance FCC Notice This device has been tested and found te comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Dolby, Dolby Vision, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories. DOLBY DOLBY Manufactured under license from Dolby Laboratories. VISION AUDIO Confidential unpublished works. Copyright © 1992-2019 Dolby Laboratories. All rights reserved. dts For DTS patents, see VIRTUAL _— Manufactured under license from DTS Licensing Limited. Areal DTS, the Symbol, DTS and the Symbol together, Virtual:X, and the DTS Virtual:X logo are registered trademarks and/or trademarks of DTS, Inc.
