49R4 QUICK SETUP GUIDE Before using the TV, please read this guide thoroughly and retain it for future reference. For more detailed instructions, please see the User Manual.
Declaration
Important Safety Precautions This symbol alerts user about the presence of a dangerous voltage not isolated inside the product which can be sufficiently powerful to constitute a risk of electrocution. ATTENTION RISK OF SHOCK ELECTRIC Do not open the back cover. This symbol alerts user about the presence of important operating instructions and maintenance in the document enclosed in the package. In no case the user is allowed to operate inside the TV set.
Important Safety Precautions Warning Never place a television set in an unstable location. A television set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as: Using stands recommended by the manufacturer of the television set. Only using furniture that can safely support the television set. Ensuring the television set is not overhanging the edge of the supporting furniture.
Important Safety Precautions Safeguards Please read the following safeguards for your TV and retain for future reference. Always follow all warnings and instructions marked on the television. 1. A note about safety and operating instructions Read and follow all safety and operating instructions, and retain them safely for future reference. 2. Heed Warnings Adhere to all warnings on the appliance and in the operating instructions. 3. Cleaning Unplug the TV from the wall outlet before cleaning.
Important Safety Precautions 9. Power-Cord Protection Power- supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plug, wall outlets, and the point where they exit from the TV. MAIN plug is used as the disconnect device, the disconnect device shall remain readily operable. 10.
Important Safety Precautions (d) If the TV does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the TV to its normal operation. (e) If the TV has been dropped or the cabinet has been damaged.
Contents Figures and illustrations in this manual are provided for reference only and may differ from actual product appearance. Parts of the software function changes with the system upgrade.
Installing the Stand or Wall Mount Bracket Installing the Stand CAUTION Be sure to disconnect the A/C power cord before removing a base stand or installing Wall-Mount brackets. The screen display is very fragile, and must be protected at all times when installing the base stand. Be sure that no hard or sharp object, or anything that could scratch or damage the screen display, comes into contact with it. DO NOT exert pressure on the front of the TV at any time because the screen could crack.
Installing the Stand or Wall Mount Bracket Installing the Wall Mount Bracket Wall-Mount hole pattern (mm) 200 × 200 Wall-Mount screw size M6 8.0~10.0mm Wall-Mount Bracket Screw Spacer The TV's rear cover NOTES Follow instructions provided with the Wall mount bracket.
TV Front TV Front STANDBY /SOURCE Remote sensor Power indicator Item Description Remote sensor Receive remote signals from the remote control. Do not put anything near the sensor, as its function may be affected. Power indicator The light is red in standby mode. Press the single button when in standby mode, TV will be turned on. STANDBY / SOURCE Press the single button to call up the menu.
TV Rear AV IN VIDEO DIGITAL AUDIO OUT LAN DC 5V USB1 L USB2 R 0.5A(MAX) Power Input HDMI 2(ARC) HDMI 1 HEADPHONE SERVICE ANT TV Rear NOTES Check the jacks for position and type before making any connections. Loose connections can result in image or color problems. Make sure that all connections are tight and secure. The TV may not be compatible with all external devices. To check compatibility, please refer to the user manual of external device.
Making Connections ANT Connect an outdoor VHF/UHF antenna or cable. Outdoor Antenna ANT Cable ANT OUT or (not included) Antenna Cable (75Ω) VHF/UHF Antenna HDMI / AV Connect a HDMI / AV cable from an external AV equipment. No sound connection is needed for HDMI to HDMI connection. If the signal resolution does not match the specification table, you need to change the setting of device according to the table. Please consult your device user manual for instruction.
Making Connections Audio Amplifier/Speaker HDMI HDMI 2(ARC) HDMI cable (not included) HEADPHONE Connect Headphone for audio out of the TV. The built-in speakers will be disabled once the headphone is connected. HEADPHONE ATTENTION Excessive sound pressure from earphones and headphones can cause hearing loss. Headphone (not included) NOTE Please make sure that the headphone you plug in is without microphone function, or it may not be supported.
Making Connections LAN (Wired setup) Connect your TV to your network by connecting the LAN port on the back of your TV to an external modem or router using a LAN (Ethernet/Cat 5) cable. See the illustration below. · We recommend you to use a modem or router that supports Dynamic Host Configuration Protocol (DHCP). Modems and routers that support DHCP automatically provide the IP address, subnet mask, gateway, and DNS, so you don’t have to enter them manually. Most home networks already have DHCP.
Making Connections If you apply a security system which is not listed below, it will not work with the TV. Security system : WPA, WEP, WPA2. In order to guarantee smooth network, the distance between router and TV should be less than 10 meters. What is Freeview Plus? Freeview Plus is a new television service delivered via broadband providing a state of the art Electronic Program Guide (EPG) and seamless access to catch-up TV across the free-to-air networks with the simple press of a button.
Remote Control Power Standby button: Power on/ Standby INPUT Source selecting button Select a channel or input numbers Start Timeshift T.
Remote Control Installing Batteries in the Remote Control 1. Slide the back cover to open the battery compartment of the remote control. 2. Insert two AAA size batteries. Make sure to match the ( + ) and ( - ) ends of the batteries with the ( + ) and ( - ) ends indicated in the battery compartment. 3. Close the battery compartment cover. 1 Gently push and slide 2 Insert the batteries 3 Gently push and slide NOTES Dispose of your batteries in a designated disposal area.
Turning the TV on for the First Time Turning the TV on for the First Time 1. Connect the mains cable to the mains socket after you have completed all the connections. 2. The first time you turn the TV on, it will go straight to the Installation Guide. 3. Press the [ / / < / >] to navigate the menu and change the settings. Press the [OK] button to confirm. Language Select your desired language to be displayed on the menu. Location Select the location where you will operate the TV.
Specifications Features, appearance and specifications are subject to change without notice. If you encountered difficulty when setting up your TV, we suggest you refer to the troubleshooting tips in the User Manual. Item Without Stand Dimension (W × H × D) (mm) With Stand (W × H × D) Weight (kg) 49" 1103 × 642 × 86 1103 × 699 × 217 Without Stand 8.6 With Stand 8.
