OLED TV Read the manual carefully and ensure you have fully understood its contents before operating this device for the first time. RSAG2.025.
Contents Declaration ................................................................ 2 Declaration and Disposal of Used Electrical & Electronic Equipment 3 Important Safety Warning ..................................................................... 3 Precautions 1-Shortcuts Instructions 2-Menu 3-Advanced Features 4-Other Information Safeguards................................................................. 4 1.1 Turning your TV on or off ........................................... 6 1.
Declaration Declaration Any content and service accessed through this device, while only intended for individual non-commercial use, shall be the property of the applicable third party and subject to protection by regulations and laws on copyright, patent, trademark and other intellectual property rights.
Important Safety Precautions This symbol alerts user about the presence of a dangerous voltage not isolated inside the product which can be sufficiently powerful to constitute a risk of electrocution. ATTENTION RISK OF SHOCK ELECTRIC Do not open the back cover. This symbol alerts user about the presence of In no case the user is allowed to operate inside the TV set. important operating instructions and maintenance Only a qualified technician is entitled to operate. in the document enclosed in the package.
Important Safety Precautions Safeguards Please read the following safeguards for your TV and retain for future reference. Always follow all warnings and instructions marked on the television. 1. A note about safety and operating instructions Read and follow all safety and operating instructions, and retain them safely for future reference. 2. Heed Warnings Adhere to all warnings on the appliance and in the operating instructions. 3. Cleaning Unplug the TV from the wall outlet before cleaning.
Important Safety Precautions 11. Power Lines An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. Where installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. 12.
Shortcuts Instructions You can use shortcuts on the remote control for fast operation. Refer to the “ Quick Setup Guide ” for more information. 1.1 Turning your TV on or off To turn your TV on or off : 1. Plug the AC power cord into a socket outlet of AC power supply. 2. When the TV is powered on, press the [ ] button on the remote control, to turn TV on or off. NOTES When your TV is in standby mode, it is still consuming power.
Shortcuts Instructions 1 2 3 Cable 6 7 4 California’s Golden Parks 7:00PM 7:00 PM Mon. 31 Dec.
Shortcuts Instructions 1.4 EPG It provides convenience to check TV programs that will be available in the next 7 days. The information displayed by the EPG is made available by the commercial television networks for digital channels only. The EPG also provides a simple way to program the recording of your favorite programs and a reminder function which can switch channel automatically at scheduled time so that you do not miss programs of interest.
Shortcuts Instructions 1.5 PVR/T.Shift PVR The PVR enables the user to easily record the digital television content for later viewing. The function is to be used in DTV source only. The format of storage disk is recommended to be FAT32 or NTFS. This option does not commerce if the data storage device has not been connected. There are two options for recording, the first option is to use Electronic Program Guide (EPG), the second option is to press the [ ] button to select PVR or T.Shift.
Menu 2.1 Using the Menu Function To quickly access menu function, press the [ ] button on your remote. Audio Language Select a desired language from the list. (Only available for DTV channels) NOTE This function is only available on certain models in specific geographical areas. Subtitle Select desired subtitles from the list if the selected channel supports multi-language subtitles. (Only available for DTV channels) Headphone Volume Adjust the volume of the headphone when the headphone is connected.
Menu 2.2 Using the Settings Menu 1. Press the [ ] button on your remote to enter the Settings menu. The Settings Menu consists of the following settings: • Picture • Sound • Network • Channel • System • Support 2. In each menu, you can: Press the [ / / < / >] buttons to select an item, Press the [OK] buttons to enter the sub-menu or to set on or off, Press the [< / >] buttons to adjust the value, Press the [BACK] button to return to the previous menu. 3. Press the [EXIT] button to exit the menu.
Menu • Game Mode: Best suited for PC or Games console. Reduces Input Lag and improves responsiveness. NOTE: Some models don’t support this function. • Adaptive Contrast: Automatically darken dark areas and lighten light areas of images to see more details. • Ultra Smooth Motion: Reduce seeing afterimages that are left on the screen when viewing fast-moving objects. Judder Reduction: To enhance picture fluency, try to reduce picture judder. However, in some cases this may cause picture blur.
Menu 2.4 Using the Sound Menu Sound Mode Headphone Select a preset sound mode to suit the type of content you are listening to. • Headphone Mode: Change the way audio is sent through the type of device that’s connected to your TV Audio Out port. • Headphone Volume: Independently adjust the volume of audio out devices. Customize selected Sound Mode. • Apply Audio Settings: Adjust current sound mode to apply to all source or just current source.
Menu 2.5 Using the Network Menu Set up the network to gain full access of Smart TV features. • Connection Type: Ethernet Choose a wired network connection to access the Internet. IP Setting: Configure the IP setting for your network connection. Network Configuration • Connection Type: Wireless Choose a wireless network connection to access the Internet. Advanced Settings: Configure the advanced wireless network settings for the TV. Refresh: Refresh wireless network.
Menu 2.6 Using the Channel Menu Auto Scan Automatically scan for channels to view programmes from your TV source. Channel Edit Manually edit the channel list order to your preference. Adjust advanced settings for Channel. • Manual Scan: Perform manual channel scan for ATV and DTV. • ATV Fine Tuning: Fine tuning current channel to improve the programme picture. • Channel List Auto-Update : Allow your TV auto-update the channel list from the content provider.
Menu 2.7 Using the System Menu Set the current time based on your location. • Time Format: Set the time to display in a 12 or 24-hour format. • Jalaali: Turn the Jalaali On or Off. Time NOTE: This function is only available on certain models in specific geographical areas. • Date/Time: Select the mode Manual or Auto and set the Date and Time if select Manual. • Time Zone: Select your location time zone. • Daylight Savings: Select whether to apply Daylight Savings Time to the TV.
Menu Select the language used for this TV and you location. • Location: Choose the location from where you will watch your TV. • Menu Language: Set the default language for the TV menu. • Primary Audio: Set the default audio output language for the type of digital broadcast content that you’re viewing. Language and Location • Secondary Audio : Set the secondary audio output language for digital broadcast content. • Primary Subtitle: Set the default subtitle language for digital broadcast content.
Menu Access the Advanced Settings menu. • TV Name: Choose a name for your TV. The name will be shown to devices that are available for sharing data. • PVR&Time-Shift Settings: Initialize the external USB disk to support PVR and Time-Shift. (Since the function record temporary the program onto a hard disk only.) • Power Indicator: Set the power indicator light to stay On or Off when standby mode. • Indicator Light Setting: Set the Indicator light. Off: Always Off.
Menu 2.8 Using the Support Menu View system information. • Signal Info: Show signal information of current input. System Info • Network Connection: View your TV’s network connection information. • Input Connections: View your TV’s input connection information. • Version: View your TV’s software version and hardware code. Perform self diagnosis to test sound, picture and connections. • Picture Test: Perform this test to test your TV’s picture.
Advanced Features 3.1 Getting familiar with the Home screen The simple design of the Home screen menu makes it easy to navigate. It serves as the central location to access Notifications, Apps, LiveTV, Inputs, Media and Settings. To access the Home screen, press the [ make your selection. ] button on your remote control and use the arrows on the D-pad to Indicators and Icons on the top of the Home screen You can always view the current time at the top left corner of the Home screen.
Advanced Features 3.2 Apps Numerous factory-installed apps are available for you to choose from for your entertainment preferences. Installing an App Even though your TV has numerous factory-installed apps, there may be others that you’d like to download. To install an app: 1. From the Home screen, click on the Apps to select the VEWD icon. 2. Navigate to the SEARCH tab at the top of the screen. 3. Begin typing the name of the app.
Advanced Features 3.3 Media Media is a central location for you to upload and view or listen to different types of content (for example, your photos, music and movies) through the following methods: • A USB thumb drive or hard drive • Compatible mobile phone, tablet or other personal devices: You can stream movies, pictures and music that are stored on Compatible personal device and play or view the content on your TV.
Advanced Features 3.4 Using Anyview Cast to mirror content from your device to the TV screen The Anyview Cast is an app that enables you to share (or cast) a video, audio or image from compatible Android device to the TV. From your tablet or phone To mirror content from your tablet to the TV: 1. Press the [ ] button on your remote to enter the Settings menu. Go to Network > Network Configuration and select Wireless. 2. Press the [INPUT] button on your remote and select the Anyview Cast. 3.
Advanced Features 3.6 Software updates for your TV The software (also referred to as firmware) is part of what powers your TV. We will provide software updates to continuously enhance your TV and correct any issues that may impact your user experience; therefore, we recommend that you keep your TV connected to the Internet to receive updates when they are available. You can choose to receive updates automatically or check for software updates and install them manually.
Other Information 4.1 Troubleshooting If the TV does not operate as usual or appears to be faulty please read carefully this section. Many operational issues can be resolved by users. It is also advisable to unplug the TV from the AC socket on the wall for 60 seconds or more, then reconnect and start again. This simple procedure helps in restoring stable conditions for electric circuits and firmware of the unit.
Other Information Remote control does not work. Smart Television with wireless network capability Wi-Fi fail to join a local network. Confirm that TV still has power and is operational. Change the batteries in the remote control. Check if the batteries are correctly installed. Configure the local wireless router or access point for WPA-PSK security before attempting to connect the TV to the Wi-Fi network. Follow instruction in the User Manual of the television to setup a wireless connection.
