LED Backlight TV Read the manual carefully and ensure you have fully understood its contents before operating this device for the first time.
Contents Disposal of Used Electrical & Electronic Equipment 2 Important Safety Warning ..................................................................... 2 Precautions 1-Shortcuts Instructions 2-Menu 3-Advanced Features 4-Other Information Safeguards................................................................. 3 1.1 Turning your TV on or off ........................................... 5 1.2 Selecting the Input Source ........................................ 5 1.3 Using the Live TV .......
Important Safety Precautions This symbol alerts user about the presence of a dangerous voltage not isolated inside the product which can be sufficiently powerful to constitute a risk of electrocution. ATTENTION RISK OF SHOCK ELECTRIC Do not open the back cover. This symbol alerts user about the presence of In no case the user is allowed to operate inside the TV set. important operating instructions and maintenance Only a qualified technician is entitled to operate. in the document enclosed in the package.
Important Safety Precautions Safeguards Please read the following safeguards for your TV and retain for future reference. Always follow all warnings and instructions marked on the television. 1. A note about safety and operating instructions Read and follow all safety and operating instructions, and retain them safely for future reference. 2. Heed Warnings Adhere to all warnings on the appliance and in the operating instructions. 3. Cleaning Unplug the TV from the wall outlet before cleaning.
Important Safety Precautions 11. Power Lines An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. Where installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. 12.
Shortcuts Instructions Figures and illustrations in this manual are provided for reference only and may differ from actual product appearance. Parts of the software function changes with the system upgrade. You can use shortcuts on the remote control for fast operation. Refer to the “ Quick Setup Guide ” for more information. 1.1 Turning your TV on or off To turn your TV on or off : 1. Plug the AC power cord into a socket outlet of AC power supply. 2.
Shortcuts Instructions Viewing Channel List After you have done an automatic channel scan (if you’re using an antenna) or receiving your channels through a cable provider, you can view your list of channels by pressing [OK] button on your remote. You will see the channel list display on the screen. Enter the sub-menu of channel list Press the [OK] button and the [ < ] button on your remote when viewing channels. Introduction of the sub-menu 1.
Shortcuts Instructions 1.4 EPG It provides convenience to check TV programs that will be available in the next 7 days. The information displayed by the EPG is made available by the commercial television networks for digital channels only. The EPG also provides a simple way to program the recording of your favorite programs and a reminder function which can switch channel automatically at scheduled time so that you do not miss programs of interest.
Shortcuts Instructions 1.5 PVR/T.Shift PVR The PVR function allows you to easily record digital television content for later viewing. The function is only available in DTV source. To use PVR, you must connect a USB device for recording. The format of the storage disk should be NTFS, FAT32. The PVR will not function if a data storage device has not been connected.
Shortcuts Instructions broadcast. • Some broadcasters may restrict to record the programme. • During the recording progress, channels locked with Channel Lock(password needed) are disabled to watch. • The PVR and T.Shift functions doesn’t support analogue channels. • The PVR function is disabled for scrambled channels(CI module needed). • The T.Shift function is disabled for channels locked with Channel Lock or scrambled channels (CI module or password needed). • The PVR and T.
Menu 2.1 Using the Menu Function To quickly access menu function, press the [ ]/[ ] button on your remote. Headphone Volume Adjust the volume of the headphone when the headphone is connected. Channel List View the Channel List and adjust channels while watching TV. (Only available for TV channels) Guide Enter guide function under TV mode. It provides an overview of each digital channel’s programme lineup. Teletext Display the teletext mode.
Menu 2.2 Using the Settings Menu 1. Press the [ ] / [ Settings menu. ] button on your remote to select Settings, and then press the [OK] button to enter the The Settings Menu consists of the following settings: • Picture • Sound • Network • Channel • Accessibility • System • Support 2.
Menu • Game Mode: Best suited for PC or Games console. Reduces Input Lag and improves responsiveness. NOTE: Some models don’t support this function. • Adaptive Contrast: Automatically darken dark areas and lighten light areas of images to see more details. • Ultra Smooth Motion: Reduce seeing afterimages that are left on the screen when viewing fast-moving objects. NOTE: Some models don’t support this function. • Noise Reduction: Improve how clear the picture appears by reducing noise.
Menu • Sound Mode Settings : Maintains consistent loudness levels from wide dynamic range programs, loud commercials, and channel or input changes. NOTE: The feature is only available on selected models. • : Provides surround sound experience by utilizing psychoacoustic processing to place sounds beside, behind and above the viewer. For best results use with Total Sonics. NOTE: The feature is only available on selected models. • Bass Boost: Built-in Bass Adjustment.
Menu 2.5 Using the Network Menu Set up the network to gain full access of Smart TV features. • Connection Select: Ethernet Choose a wired network connection to access the Internet. IP Settings: Configure the IP setting for your network connection. Network Configuration • Connection Select: Wireless Choose a wireless network connection to access the Internet. Advanced Settings: Configure the advanced wireless network settings for the TV. Refresh: Refresh wireless network. Add: You can add wireless network.
Menu • CI+ Module Settings: • Common Interface: Review CAM boot menu NOTE: CI Card is not supported in some regions so this option may not be available. Advanced Settings • CI card PIN: Set the CI CAM pin. NOTE CI Card is not supported in some regions so this option may not be available. • CAM Profile Search: Quick channel scan with CAM. NOTE CI Card is not supported in some regions so this option may not be available. 2.
Menu 2.8 Using the System Menu Set the current time based on your location. • Time Format: Set the time to display in a 12 or 24-hour format. • Jalaali: Turn the Jalaali On or Off. Time NOTE: This function is only available on certain models in specific geographical areas. • Date/Time: Set the Date and Time. • Time Zone: Select your time zone. • Daylight Savings: Select whether to apply Daylight Savings Time to the TV. Adjust the timer settings to suit your preference.
Menu Select the language used for this TV and your location. • Location: Choose the location from where you will watch your TV. • Menu Language: Set the default language for the TV menu. Language and Location • Primary Audio: Set the default audio output language for the type of digital broadcast content that you’re viewing. • Secondary Audio : Set the secondary audio output language for digital broadcast content. • Primary Subtitle: Set the default subtitle language for digital broadcast content.
Menu • CEC Device List: Show up available CEC devices. NOTES HDMI cables must be used to connect HDMI CEC-compatible devices to your TV. HDMI & CEC Functions The HDMI CEC feature of the connected device must be turned on. If you connect an HDMI device that is not HDMI CEC-compatible, all the HDMI-CEC control features do not work. Depending on the connected HDMI device, the HDMI-CEC Control feature may not work. Connect to the Devices using bluetooth technology.
Menu • Indicator Light Setting: Set the indicator light to stay On or Off when watching TV. Off: Always Off. Power:Off when standby and On when watching TV. Always:Always On. NOTES The standby energy consumption of television is different when you select different options. Some models don’t support this function. • Input Labels: Edit the input labels. Advanced Settings • Notifications: Allow pop-up notifications to appear for useful information and events that occur with your TV.
Menu Set your TV to receive the latest firmware. • Auto Firmware Upgrade: Set your TV to automatically receive the latest firmware. NOTE: Please ensure your TV is connected to the Internet. • Check Firmware Upgrade: Check to ensure that your TV has received the latest firmware. System Update NOTE: Please ensure your TV is connected to the Internet. • Check OAD Upgrade : Check to ensure that your TV has received the latest firmware via the tuner. NOTES: Please ensure your TV is connected to the Internet.
Advanced Features 3.1 Getting familiar with the Home screen To access the Home screen, press the [ make your selection. ] button on your remote control and use the arrows on the D-pad to Indicators and Icons on the top of the Home screen You can always view the current time at the top of the Home screen. If your TV is connected to the Internet through a wireless connection or an Ethernet cable, then an icon / will display on the screen.
Advanced Features 3.2 Apps Numerous factory-installed apps are available for you to choose from for your entertainment preferences. Installing an App Even though your TV has numerous factory-installed apps, there may be others that you’d like to download. To install an app: 1. From the Home screen, click on the Apps to select the AppsNOW icon. 2. Use the navigation buttons of your remote to select the app that you want to install and then press the [OK] button.
Advanced Features 3.3 Media Media is a central location for you to upload and view or listen to different types of content (for example, your photos, music and movies) through the following methods: • A USB thumb drive or hard drive • Compatible mobile phone, tablet or other personal devices: You can stream movies, pictures and photos that are stored on Compatible personal device and play or view the content on your TV.
Advanced Features 3.4 Using Anyview Cast to mirror content from your device to the TV screen The Anyview Cast is an app that enables you to share (or cast) a video, audio or image from compatible Android device to the TV. From your tablet or phone To mirror content from your tablet to the TV: 1. Press the [ ] / [ ] button on your remote to select Settings, press the [OK] button to enter the Settings menu. Go to Network > Network Configuration and select Wireless. 2.
Other Information 4.1 Troubleshooting If the TV does not operate as usual or appears to be faulty please read carefully this section. Many operational issues can be resolved by users. It is also advisable to unplug the TV from the AC socket on the wall for 60 seconds or more, then reconnect and start again. This simple procedure helps in restoring stable conditions for electric circuits and firmware of the unit.
Other Information Remote control does not work. Smart Television with wireless network capability Wi-Fi fail to join a local network. Confirm that TV still has power and is operational. Change the batteries in the remote control. Check if the batteries are correctly installed. Configure the local wireless router or access point for WPA-PSK security before attempting to connect the TV to the Wi-Fi network.