User Manual

Settings Overview
Adjust the Audio Output settings
Enable eARC
Press button on your remote control to select Settings > Display & Sound > Audio Output > eARC.
Connect an audio device that supports eARC via HDMI-eARC, and set eARC to On to enjoy premium sound
quality.
Enable TV speaker
Press button on your remote control to select Settings > Display & Sound > Audio Output > TV
Speaker.
Turn on or off the TV speaker.
Note:
• This menu is only available when you select TV speaker as audio output.
Digital Audio Out
Select the digital audio output format that best suits the audio device type.
Note:
• When using optical connection, PCM and Dolby Digital are suggested.
• If your external audio device does not support Dolby or DTS, PCM is suggested.
Digital Audio Delay
Adjust the digital audio output delay time to sync sound from an external speaker with the images on the TV.
Note:
• Digital Audio Out and Digital Audio Delay functions are only applicable when Audio Output is set to ARC or
when external audio players are connected via DIGITAL AUDIO OUT jack.
Headphone Settings Setup
Set the sound output mode through headphones.
After connecting your wired or Bluetooth headphone, or other external audio amplifiers, you can set up your
TV to your preference.
Note:
• This function may not be applicable in some models/countries/regions.
• Headphone Mode
Change the way audio is sent through the type of device that's connected to your TV Audio Out port.
• Headphone Volume
Independently adjust the volume of wired headphones.
Related information
Connecting Bluetooth Devices on page 20
Connecting Headphones on page 23
Connecting Speakers or Other Audio Receivers on page 24
Connecting a Digital Audio System with ARC on page 25
34