4K UHD Smart TV Quick Start Guide Help Hi sense improve the environment by reducing paper waste. For detailed instructions and feature descriptions, access the full User Manual online. Before using the TV, please read this guide carefully and keep it for future reference.
® 2017 Hi sense Company Ltd. All Rights Reserved. All material in this Quick Start Guide is the property of Hi sense Company Ltd. and its subsidiaries, and is protected under US, CANADA, MEXICO and International copyright and/or other intellectual property laws. Reproduction or transmission of the materials, in whole or In part, In any manner, electronics, print, or otherwise, without the prior written consent of Hi sense Company Ltd. Is a violation of Hi sense Company Ltd.
Register Your TV! Congratulations on the purchase of your new TV! This Quick Start Guide will walk you through a few easy steps to set up your TV. For detailed instructions, access the User Manual on the support pages listed below. Because we value your business, we want to keep you in the know of "all things Eisenstein. Using your mobile phone, scan the Registration page QR code to register your TV. Depending on the make and model of your phone, you may need to download a QR code scanning app.
PACKAGED CONTENTS Your package in which you purchased your new TV contains the following items: . TV * Quick Start Guide (this document) » Power Cord » 1 sot of AAA batteries * Remote Control © Important Safety Information and Warranty Card » 2 Base Stands ® 2 Column Bases (657) » 4 Screws (M4x8) {55") * 8 Screws (M4x10) (65") IMPORTANT: To prevent accidentally discarding items that came with your TV, be sure to check ALL of the foam in the carton box.
STEP 1. Attach the TV Stand or Wall Mount Bracket Attach the TV Stand CAUTION: » Be sure to disconnect the A/C power cord before removing a base stand or installing Wall-Mount brackets. « The screen display is very fragile, and must be protected at all times when installing the base stand. Be sure that no hard or sharp object, or anything that could scratch or damage the screen display, comes into contact with it. DO NOT exert pressure on the front of the TV at any time because the screen could crack.
For 65" 1. Carefully place your TV face-down on a soft, flat surface to prevent damage to the TV or scratching to the screen. 2. Using the screws in the accessory bag, secure the 2 Column Bases to tha Base Stand tightly. 3. Secure the Base Support to the TV with the 4 screws in accessory tightly.
Attach the Wall Mount Bracket (not included) Before you begin the third-party manufacturer instructions, be sure fo do the following things: 1.Place the TV face down on a clean, safe and cushioned surface. 2 Remove the TV stand if you already attached it. 3.Place the spacers (not included} in the corresponding bracket holes. Bracket (not provided) CAUTION: + When you attach the mount, be sure to use the spacers {provided by the third-party manufacturer) between the TV and the bracket.
STEP 2. Connect devices to your TV Check to ensure that you have selected the right cables for the ports and that they are connected securely. Loose connections can affect the quality of the picture image and color. label ort Able Textual Equipment Brief Description ANT/CABLE @ Connect an outdoor VHF/UHF antenna.
ble label Textual Equipment Brief Description DIGITAL AUDIO OUT Audi Amplifier Connect an optical cable from an external digital audio system. AUDIO QUOT headphones to hear audit from the I ==z Snowboard Audio Trampler Connect an audio adapter {not provided) from an textual analog audit system. 558 Connect a USB 3.0 device to transfer photos, music and movies to your TV at a rate that's 10 times faster than the USB 2.0 fort NOTE: You can still plug & USB 2.0 device into a USB 3.
STEP 3. Establish a network connection 1.Press the button on the remote control, press[ v ] button to select Settings and then press [OK] to enter the Settings menu. electable Network — Network Configuration. TV JACK External Modem IP Sharer (Router) {ADSL/VDSL / Gable TV) {with CPD server) Modem Cable Establish a wired network connection Automatically obtain an IP address 1.Select Ethernet. The TV will automatically obtain an IP address and connect to the network.
Establish a wireless network connection 9 Wireless LAN Adapter butt-in TV set The TV can directly receive network signals via wireless router 1.Select Wireless. The list of networks will be displayed automatically. 2.Select a wireless network from the list, Input the password and select Connect. 3.If the network connection does not appear In the list, select Refresh to refresh the list or select Add to manually enter SAID and Security mode selection Close the network connection Select Off.
Buttons on your TV remote Prows on / off Enter Channels / Input numbers Tum Closed Caption On/Off Uve TV Volute (up/down) The button for the Quick setup menu D-pad {upidownfieftright navigation bunions) Return 1o the previous place in the menu or app Medea content contra function buttons Quick access buttons to apps — Infrared transmitter Chang TV Input sours Quick access bunions to PICTURE/SOUND/ASPECT/SLEEP Dash button Select a digital sub-channel Mute and rosters sound Channel (up/down) Display the Coma
STEP 4. Begin using your remote 1. Slide the back cover to open the battery compartment of the remote control Gently push and slide Insert the batteries Gently push and slide 2. Insert two AAA size batteries. Make sure o match the and ends of the batteries with the and ends indicated in the battery compartment. 3. Replace the battery compartment cover. Important Information about the remote and batteries « Discard batteries In a designated disposal area. Do not throw them Into a fire.
10178, 10463, 11463, 10748, 11314, 11860, 10171, 11204, 11328, 11517, 11641, 11780, 11785, 11892, 11963, 12002 Cox 10178, 1328, 1463 Dish 627, 538, 720, 659 If the code associated with your Cable or Satellite provider is not listed, does not work or you cannot locate the instructions to program your remote, call your local Cable or Satellite provider's customer service center. If your Cable or Satellite provider does not have a code available, please contact us at one of the phone numbers on Page 2.
Press the Power button on the remote to tum on the TV. A splash screen that shows the logo appears. Next, the First-Time Setup Menu begins by prompting you to choose your Language, Country, and Time Zone. 15 STEP 6. Complete the first-time setup menu After the splash screen that shows the logo appears, begin the first-time setup menu. L o Task * Using the D-pad arrows of your remits, choose your Language, Country and Time Zone. » Chooses Decline or Ares, then select Confirm icon and press [OK].
you anneals. Chooses from one of the following sources below. = HDMI * ANT/CABLE vV COMPONENT * NONE TIP: If you use an antenna to receive channels, then you must complete the first-time setup menu in order to run a channel scan. STEP 7. Begin to enjoy your TV Your Smart TV is easy to use and brag-worthy! Now that you've completed the first-time setup menu, the Home screen is your starting point for navigating the TV. Gone are the days where your TV only provides one way for you to be entertained.
PRODUCT SPECIFICATIONS Model Name S5H9D Plus €5HSD Plus 55H9907 €5HI907 anion out 5t 48.6 x 28.1 x 2.4 Inches 57.2 % 32.9 % 2.4 Inches xHx (1235 % 713 x 80 mm) (1452 % 835 x 81 mm) Sta 48,6 Inches §7.2% 35.2 % 1.4 Inches (1236 » 763 x 220 mm) (1452 x 895 x 290 mm) ht Without Tend. 41.9 lbs (19 kg) 701 lbs (31.8 kg) tan 43.2 Ibs (19.6 kg) 71.4 1bs (32.4 kg) n Skye (Diagonal) 54.6 Inches 84.
QUICK PROBLEM-SOLVING TIPS When you experience an issue with your TV, tum it off and on again. If this does not resolve the problem, then refer to the tips below. If the problem is still not resolved, then contact us at ane of the phone numbers an Page 2. ISSUES POSSIBLE SOLUTIONS » Check If the power cord Is plugged Into a powered AC outlay. * Rags the @ Power button on the remote control to activate the unit from 'Standby’ mode. » Check to sea If the LED light Is on or not.
« The 'click' sound can occur when the temperature of the television changes. This change causes the television cabinet to expand or contract, which makes the sound. This is normal and the Confirm that TV still has power and is operational. e remake oal Ines not we « Change the batteries in the remote control. « Check if the batteries are correctly installed. Need more help? Additional help Is available online at support links on Page 2.
Certification and Compliance FCC Notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. Tess limits are designed fo provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
