ES-G1650B2 USER MANUAL Before using the TV, please read this manual thoroughly and retain it for future reference.
USER MANUAL Before using the TV, please read this manual thoroughly and retain it for future reference.
Copyright Statement ® 2017 Hi sense Company Ltd. All Rights Reserved. All material in this User Manual is the property of Hi sense Company Ltd. and its subsidiaries, and is protected under US, CANADA, MEXICO and International copyright and/or other intellectual property laws. Reproduction or transmission of the materials, in whole or in part, in any manner, electronic, print, or otherwise, without the prior written consent of Hi sense Company Ltd. is a violation of Hi sense Company Ltd.
Disclaimer Page **Notwithstanding anything to the contrary, including in any or all descriptions, representations, statements or other communications related to this Hi sense device (hereinafter "Device") mads in any form whatsoever and at any time, some or all of the per-installed, or subsequently installed Application Services may not be available or capable of functioning as intended by the provider of the Application Services in any or all usage areas for reasons outside of Hi sense's control, including
Connecting Devices o your TV You have several options for connecting your TV to different devices. The method in which you connect will be based upon the type of cables you have and the available outputs on your device. Connecting on fencing, cable bebop box or satellite receiver To connect an antenna,cable set-top box or satellite receiver: 1. Connect one end of a coaxial cable (not included) to the RF OUT port on the antenna, cable or satellite box.
Conn acting an AY devices with o component dives cobble red/bloe/green) To connect an AV device with a component cable (not provided): 1. Use a component video cable to connect the component output ports of the external device to the Y Pap, ports for the TV. (Y = green, Py = blue, and Py = red). Use an audio cable o connect the component audio ports of the external device to the TV AUDIO (L/R) ports. 2. Plug the connected devices into the Y Paps and L/R ports on the TV before switching it on. 3.
Consoling on Enabled devices You can connect an ML-enabled device, such as a cell phone, and view the screen of your device on EXTERNAL the TV. DEVICE 1. Connect one end of an HDMI-to-ML cable {not PORT provided) to the micro USB port on the device. 2. Connect the other end of the cable to the HDMI/ MHL port. 3. Select the corresponding source from the TV. 4 NOTES * This feature may be unavailable on some TV series. * We strongly recommend to use MHL Cable with 2 core as shown in the figure.
Consoling o dishevel sound bor to use Audio Returns Channel [ARC) If you'd like to use the Audio Return Channel (ARC) feature to have sound sent from the TV back down an HDMI cable to a digital sound bar, then you will need to connect the cable to the HDMI / ARC port. By using this feature, you will also be able to control the sound bar with your TV remote instead of having to use multiple remotes for each device. To connect a digital sound bar with an HDMI cable (not provided): 1.
204 oF Windsor Nat work You have the option to connect your TV to a wireless or wired network o access the Internet. For more information about the network settings on TV, see ek Men o5 page 21 Conn acing Your TV 1o o Wire Connecting bo o wireless network Our built-in wireless LAN adapter supports the IEEE 802.11 ac/b/g/n communication protocols and we recommend that you use an IEEE 802.11n or IEEE 802.11ac router. When you play a video over an IEEE 802.11 b/g connection, the video may not play smoothly.
Consoling bo o wired [Ethernet] network You can attach your TV to your LAN in one of the three following ways: % Optional You can attach your TV to your LAN by connecting the LAN port on the back of your TV to an external modem using a Cat 5 LAN cable. See the illustration below. Extol Modem Tha Madam Port on the Wall (ADS I SLAV £ Carla TV) TV PORT fi Theme Cable % Optional 2 You can attach your TV to your LAN by connecting the LAN port on the back of your Sharer which is connected to an external modem.
Using Your TV Remote Control Buttons on our TY remote Infrared transmitter Change TV Input source Enter Channels / input numbers .
Power on / off Enter Channels / input numbers Tum Closed Caption On / Off Live TV Volume (up / down) The button for the Quick setup menu D-pad (up/down/left/right navigation buttons) Re tum to the previous place In the menu or app Media content control function buttons Quick access buttons to apps Ef NOTE -~ Change TV input source Quick access buttons to PICTURE/SOUND/ASPECT/SLEEP Dash button Select a digital sub-channel Mute and restore sound Channel (up / down) Display the Home screen All Apps Confirm but
Begin using your remote 1. Slide the back cover to open the battery compartment of the remote control. o EmD E Gently push and slide Insert the batteries Gently push and slide 2. Insert two AAA size batteries. Make sure to match the and ends of the batteries with the and ends indicated in the battery compartment. 3. Replace the battery compartment cover. £ NOTES * Discard batteries in a designated disposal area. Do not throw them into a fire.
Compelling the Firs-Time Setup Menu Press the [ (D 1] button on the remote to tum on the TV. After the splash screen that displays the logo appears, begin the first-time setup menu. Language and Location Using the D-pad arrows of your remote, choose your Language, Country and Time Zone. End User License Choose Decline or Agree, then select Confirm icon and press [OK]. Agreement Select Home Mode(which appears by default).
Shortfalls Instructions You can use shortcuts on the remote control for fast operation. Turning our TV on or off % To turn your TV on: 1. Connect the power cord to the back of the TV, then plug the power cord into an AC outlet. 2. When the TV is powered on, press the [ () ] button on the remote to tum turn your TV off, press the [ () ] button on the remote. % NOTES * When your TV is in standby mode, it is still consuming power. To completely disconnect power, please remove the plug from the AC outlet.
Viewing channel information As you use the [CH+ / CH-] button on your remote to scroll through channels, an information banner appears on the top of the screen. IR [ The information banner displays the following information: 1. Channel number Lock status Input Program name Show identification Channel name Current date and time Beginning and end time of the next program 9. Start/Stop time progress bar of the current program 10.
Using the Menu Function To quickly access menu function, press the button on your remote. Accessibility You can set Menu Audio, Video Description and High Contrast Menu on or off. The function can be used to meet the needs of visually impaired people. When the Menu Audi is set on, the contents of each menu display can be broadcast out. When the Video Description is set on, you can hear the introduction of relevant programs. When the High Contrast Menu is set on, the comparison of menu terns is more vivid.
Your TV comes with many TV setting features to allow you to customize the picture based on your viewing preference and environment. As you navigate throughout different screens to access settings, some of the indicators appear as words On and Off. Using the Seeings Menu You can press the [ @] button to access the Menu, press the [ v ] button on the D-pad to select Settings, and then press [OK] button to enter the Settings Menu.
Picture Meany = Backlash: Some models have a Dynamic Back light Control setting that you can turn Off and set to High, Middle or Low. Some models have a Local Dimming setting is available that will enable the TV to automatically adjust the back light by sections according to the changes in image and increase the contrast. The Back light Level setting enables you to adjust how bright you want images to appear, lower settings create darker images.
* RGB Only Mode: View images based on default settings or choose the color red,blue or green. = Apply Picture Settings: Adjust current picture mode to apply to all sources or just current source. % Reset Picture Settings: Reset all the picture settings in the current picture mode to the factory default values. Sound Menu = Sound Mode: Select a preset sound mode to suit the type of content you are listening to: Standard, Theater, Music, Speech and Late Night Set the sound effects to suit your preference.
Network Menu % Network Configuration: Set up the network to gain full access of Smart TV features. Network Configuration: Corvette When the Connection Type is Ethernet, means you choose a wired network connection to access the Internet. = [P Settings: Configure the IP setting for your network connection. When the Connection Type is Wireless, means you choose a wireless network connection to access the Internet. * Refresh: Refresh wireless network. * Add: You can add wireless network.
Deniability Clapton Control: Choose to leave Closed Captioning On or Off. % Menu Audio: Choose to leave the Audio Menu Prompts On or Off. = Menu Audio Settings: Adjust Menu Audio settings to your preference. * Volume: Set the Menu Audio volume. * Language: Set the Menu Audio language. * Rate: Set the Menu Audio sped. » Pitch: Set the Menu Audio pitch. * Focus Menu Audio: Tums down the background volume when Menu Audio is playing. # Video Description: Choose to leave the Video description feature On or Off.
* Device Auto Power Off: Allow CC-enabled devices to tum off with the TV. * TV Auto Power On: Allow the TV to turn On with CC-enabled devices. » Audio Receiver: Allow the Audio Receiver to send audio over an HDMI cable and back to or from your TV. * CEC Device Lists: View a list of all CC-enabled devices. * Device Connect: Allow connected devices to the HDMI ports to communicate back and forth with the TV. E4 NOTES » HDMI cables must be used to connect HDMI CC-compatible devices to your TV.
Parental Controls The Parental Controls setting allows you to block content that is not appropriate for children to watch. You can do this by creating a 4-digit password. Turning Parental Confreres On 1. Press the [ @] button on your remote. 2. Press the [ v ] button on the D-pad to select Settings, press [OK] button to enter the Settings menu. 3. Select System > Parental Controls. 4 . Press the [OK] button on your remote, a Create PIN window displays.
G General audience PG Parental Guidance suggested PG-13 Parents strongly cautioned R Restricted NC-17 No one 17 and under permitted X A rating that has now been superseded by NC-17 Canadian English Ratings c Children Co+ Children 8 years and older G General programming that is suitable for all audiences PG Parental Guidance 14+ Viewers 14 years and older 18+ Adult Programming Canadian French Ratings G General {appropriate for all ages and must contain little to no violence or sexual content) General but ina
Advanced TV Selling Tatting familiar with the Home screen The simple design of the Heme screen menu makes it easy to navigate. It serves as the central location to access Notifications, All Apps, Live TV, All Inputs, Medea, Settings and Edit on the back of the TV that you've connected external devices to. To access the Home screen, press the [Q] button on your remote control and use the arrows on the D-pad to make your selection.
Al Apps Numerous factory-installed apps are available for you to choose from for your entertainment preferences. Installing an App = To install an app from the App Installer: 1. From the Home screen, click on the All Apps to select the App Installer icon. 2. Use the navigation buttons on your remote to select the app that you want to install. 3. Press the [OK] button on your remote.
Mafia Media is a central location for you to view or listen to different types of content (for example, your photos, music and movies) through the following methods: ® USB thumb drive or hard drive = Compatible mobile phone, tablet or other personal device: You can stream movies, music and photos that are stored on Compatible personal device and play or view the content on your TV.
Using Any view Cast fo mirror contend from your devices 1o the TV screen The Any view Cast is an app that enables you to share {or cast} a video, audio or image from your Android-based device to the TV. From your tablet or phone To mirror content from your tablet or phone to the TV: 1. Press the button on your remote, press the [ v ] button on the D-pad to select Settings, press [OK] button to enter the Settings menu. Go to Network > Network Configuration and select Wireless 2.
Software updates for your TY The software {also referred to as firmware) is part of what powers your TV. We will provide software updates to continuously enhance your TV and correct any issues that may impact your user experience; therefore, we recommend that you keep your TV connected to the Internet to receive updates when they are available. You can choose to receive updates manually or check for software updates and install them manually.
Buick Problem-Solving Tips When you experience an issue with your TV, turn it off and on again. If this does not resolve the problem, then refer to the tips below. If the problem is still not resolved, then contact us. SUES POSSIBLE SOLUTIONS ® Check if the power cord is plugged into a powers AC outlet. * Press the [ (D ] button on the remote control 1o activate the unit from 'Standby’ mode. * Check to see if the LED light is on or not. If it is, then the TV is receiving power.
