User Manual

13
In the Cooling mode, the temperature can be set between
.61°F and 86°F (16°C and 30°C)
In Fan Only mode, the temperature can not be set.
The unit LED shows the target temperature for 5 seconds
and then displays the room temperature.
NOTE:
■
■
■
Change display between °F and °C
To change the temperature display between °F and °C
press both the Plus and Minus Adjust buttons at the same
time.
To operate the room air conditioner, aim the remote
control at the signal receptor. The remote control
will operate the air conditioner at a distance of up to
23'(7m) when pointing at signal receptor of the air
conditioner.
Do not use the remote if the batteries have leaked.
The chemicals in batteries could cause burns or other health hazards.
CAUTION
1. Remove the battery cover along the arrowed direction.
2. Insert new batteries making sure that the (+) and (-) of
battery are matched correctly.
3. Re-attach the cover by sliding it back into position.
Insert the Batteries
Temperature
How to Use
Storage Tip
ION (Optional)
■
NOTE:
Use 2 standard AAA(1.5volt) batteries. Do not use rechargeable
Replace batteries with new ones of the same type when the
display
becomes dim, or after 6 months.
When replacing batteries, always replace both batteries with new
batteries. Do not mix old and new batteries. Do not mix alkaline,
standard( carbon-zinc), or rechargeable (ni-cd, ni-mh, etc)
batteries.
If the air conditioner will not be used for an extended period of
time, remove the batteries from the remote.
■
■
■
batteries.
■