User's Manual

15
Note:
- The operational range between this player
and a Bluetooth device is approximately 26
feet (8m) (without any object between the
Bluetooth device and the unit).
- Before you connect a Bluetooth device
to this unit, ensure you know the device’s
capabilities.
- Compatibility with all Bluetooth devices is
not guaranteed.
- Any obstacle between this unit and a
Bluetooth device can reduce the operational
range.
- If the signal strength is weak, your Bluetooth
receiver may disconnect, but it will re-enter
pairing mode automatically.
1 During ON mode, press the
button
repeatedly on the unit or the
(BT) button on
the remote control to select Bluetooth mode.
“NO BT” will show on the display if the unit is
not paired to any Bluetooth device.
2 Activate your Bluetooth device and select the
search mode. “Hisense AX2107G” will appear
on your Bluetooth device list.
-
press and hold the
searchable. The display will show “BT PAIRING”
and you will hear "Paired" from the unit.
3 Select “Hisense AX2107G ” in the pairing list.
After successful pairing, you will hear "Paired"
(BT) button on the remote control to be
and the display panel shows “BT_IN”.
4 Play music from the connected Bluetooth
device.
To disconnect the Bluetooth function, you can :
- Switch to another function on the unit.
- Disable the function from your Bluetooth
device.The Bluetooth device will be
disconnected.
Tips:
t Enter "0000" for the password if necessary.
t If no other Bluetooth device pairs with this
player within two minutes, the player will
recover its previous connection.
t The player will also be disconnected when
your device is moved beyond the operational
range.
t If you want to reconnect your device to this
player, place it within the operational range.
t If the device is moved beyond the operational
range, when it is brought back, please check if
the device is still connected to the player.
t If the connection is lost, follow the instructions
above to pair your device to the player again.
Listen to Music from Bluetooth Device
- If the connected Bluetooth device supports
you can listen to the music stored on the
device through the player.
1. Pair your device with the player.
2. Play music via your device (if it supports A2DP).
3. Use supplied remote control to control play (if
it supports AVRCP).
- To pause/resume play, press the button on
the remote control.
- To skip to a track, press the
/ buttons on
the remote control.
USB Operation
1 Insert the USB device.
2 Press the
button repeatedly on the unit
or press the SOURCE button on the remote
control to select USB mode.
3 During playback:
- To pause or resume play, press the button
on the remote control.
-
/ buttons on the remote control.
Tips:
t The unit can support USB devices with up to
32 GB of memory.
t This unit can play MP3/WAV/WMA.
t Support a USB port: FAT32, exFAT.