Use and Care Guide

User Manual
Control Panel
Bucket
NOTE:
The figures in this manual are based on the external view of a standard model. They may differ
from that dehumidifier you have selected.
TABLE OF CONTENTS
5
5
13
13
14
6
12
9
DEHUMIDIFIER SAFETY
2
INSTALLATION REQUIREMENTS
5
Electrical Requirements
Location Requirements
DEHUMIDIFIER CARE
Cleaning the Air Filter
Cleaning the Dehumidifier
Setting the Controls
DEHUMIDIFIER USE
Draining the Dehumidifier
Normal Sounds
6
13
TROUBLE SHOOTING
PRODUCT OVERVIEW
1
Quick Connect Hose
(for pump function
model only)
Power Plug
Air Intake Grill
and Air Filter
Handle
DC Inverter Dehumidifier DOE Test Procedure Instruction
1. Press POWER button to turn on the DC Inverter
dehumidifier.
2. Hold the CLEAN FILTER and PLUS (+) button for
about 3 seconds at the same time, then the unit
will display F1 and operate Test Mode 1 according
to the 10 CFR 430, Subpart B, Appendix X test
procedure.
3. Hold the CLEAN FILTER and MINUS (-) button for
about 3 seconds at the same time, then the unit will
display F2 and operate Test Mode 2 according to the
10 CFR 430, Subpart B, Appendix X1 test procedure.
4. Please press POWER button or unplug the power supply
to quit the Test Mode.
NOTE:
*This Test Procedure is for DC Inverter Dehumidifier only.
*All the buttons will have no feedback in the Test Mode
except POWER, CLEAN FILTER, PLUS (+) and MINUS (-)
buttons.