K316 series User’s manual Please read this manual carefully before operating your TV set and retain it for further reference. Model Number: HL32K316L3D HL42K316PZL3D HL50K316PZL3D Part Number: ES-G121319 Http://www.hisense.com.
Ver 2012-02-24 HISENSE WARRANTY TERMS AND CONDITIONS 1. HISENSE Australia will provide parts and labour to you the Customer as set out herein. 2. Nothing in the warranty, limits any rights you may have under the trade practices act or any other Commonwealth or State Legislation. Such rights cannot be changed by the conditions in this warranty.
WARRANTY CLAIMS PROCEDURE Please retain this portion for your records 36 MONTHS IN HOME REPLACEMENT WARRANTY* Hisense Australia will provide its nearest service centre for repairs under warranty. You will need to ensure that you have already called Hisense Warranty Centre and received a JOB NUMBER. *Non Combination Models only 12 MONTHS IN HOME REPLACEMENT LCD WARRANTY* Hisense Australia will provide its nearest service centre for repairs or replacement under warranty.
This page has been left blank intentionally.
Table of Contents Table of Contents Hisense Declaration................................................................................... Important safety precautions..................................................................... Safeguards..................................................................................... Warning.......................................................................................... 5 6 6 9 Setting Up...........................................................
Hisense Declaration Hisense Declaration Any content and service accessed through this device, while only intended for individual non-commercial use, shall be the property of the applicable third party and subject to protection by regulations and laws on copyright, patent, trademark and other intellectual property rights.
Important safety precautions Safeguards This symbol alerts user about the presence of a dangerous voltage not isolated inside the product which can be sufficiently powerful to constitute a risk of electrocution. ATTENTION RISK OF SHOCK ELECTRIC This symbol alerts user about the presence of important operating instructions and maintenance in the document enclosed in the package. Do not open the back cover In no case the user is allowed to operate inside the TV set.
Important safety precautions Safeguards Please read the following safeguards for your TV and retain for future reference. Always follow all warnings and instructions marked on the television. 1. A note about safety and operating instructions Read and follow all safety and operating instructions, and retain them safely for future reference. 2. Heed Warnings Adhere to all warnings on the appliance and in the operating instructions. 3. Cleaning Unplug the TV from the wall outlet before cleaning.
Important safety precautions Safeguards 12.Power Lines An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. Where installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. 13.
Important safety precautions Warning If a television is not positioned in a sufficiently stable location, it can be potentially hazardous due to falling. Many injuries, particularly to children, can be avoided by taking simple precautions such as: Using cabinets or stands recommended by the manufacturer of the television. Only using furniture that can safely support the television. Ensuring the television is not overhanging the edge of the supporting furniture.
Setting Up Accessories/Installing the Stand Accessories list A/D Index EPG $$$ $$$ $ /& ' AV/COMP Adapt Batteries Remote Manual Book AV OUT Adapt Installing the Stand 1. Secure the stand column to the base plate with the 4 screws (M4 x L12) provided. 2. Secure the stand cover to the stand column vertically with the 2 screws (M4 x L12) provided. 3. Secure the stand cover to the stand column horizontally with the 2 screws (ST4 x L14) provided. 4.
Setting Up TV Front TV Front MENU 4 SOURCE 5 VOL CH 6 7 8 9 10 No. Component Component Description 1 POWER Switch Press to turn the main power ON or OFF. 2 POWER Indicator Red indicates standby mode. Blue shows that the unit is on. 3 Remote sensor Receives signals from the remote control. Do not block. 4 MENU button Press to activate the on-screen display (OSD). 5 SOURCE button Press to select the signal source for your TV. 6 VOL∧ Press to increase the volume.
Setting Up TV Rear AC INPUT HDMI 2 VGA VGA AUDIO COMP/AV1/AV2 OPTICAL AV OUT HDMI 1 HEADPHONE DC 5V USB 2 0.5A(MAX) HDMI 3 DC 5V USB 1 0.
Setting Up Rear TV Connectors TV Connectors Cables ANT 75 Brief Description Connect an outdoor VHF/UHF antenna. Yellow White Connect a composite video cable and left-right audio cables from external equipment. Red Yellow White Connect a composite video cable and left-right audio cables from external equipment. Red Green Blue Red COMP/AV1/AV2 Connect a component video cable and left-right audio cables from external equipment.
Setting Up Connection Instructions Connecting an Aerial (For analogue and digital signals) To view television channels correctly, a signal must be received by the set from the following source: -An outdoor VHF/UHF antenna -Before connecting any external device please connect the supplied 15 pin to RCA adaptor. Connecting External A/V Devices -Connect a Video RCA cable to an appropriate external A/V device such as a VCR, DVD or Camcorder.
Setting Up Connection Instructions ■ Connecting AUDIO -Connect RCA audio cables to “R - AUDIO - L” the cable supplied on the rear of your set and the other ends to corresponding audio in connectors on the Amplifier or DVD Home Theater. ■ Connecting USB data Devices -Connect a USB device for browsing photos, listening music, watching movies, reading text files. This USB port also can be used for servicing and updating software on your TV.
Using the Remote Control Installing batteries Installing the remote control batteries 1. Slide open the battery cover on the back of the remote control. 2. Install two AAA size(1.5V) batteries. Match the “+” and “-” signs on the batteries to the signs on the battery compartment. 2 3 + - + 1 3. Close the battery cover. NOTE: 1. Dispose of your batteries in a designated disposal area. Do not throw the batteries into fire. 2. Do not mix battery types or combine used batteries with new ones. 3.
Using the Remote Control The Remote Control Panel The Remote Control Panel Buttons instructions(from up to down) 1 2 3 4 5 6 7 8 A/D 9 10 11 12 13 14 16 Index EPG 15 17 18 19 20 22 21 23 24 26 28 30 25 27 29 31 EN-32957A (1) Switch the TV between on and standby mode. (2) Select among the different input signal sources. (3) Select sound mode. (4) To freeze a picture on screen. (5) Select picture mode. (6) 3D function on/off.
Using the Remote Control Quick start ■ Turning your TV on and off To turn your TV on: Connect the TV to an AC power outlet and an external antenna, then turn on the power via switch located below the front right hand side of unit. A few seconds later an image will appear on the screen. Use the setup wizard select your state and press [OK], then press [OK] again to start the turning process.
Using the Remote Control Quick start ■ Selecting the picture mode ● To select a picture mode: Press the [Picture] button to select between 5 different pre-adjusted picture modes: Dynamic, Bright, Standard, Soft and User (configurable mode). The User mode automatically preserves your personal settings after adjusting brightness, colour and contrast etc.
Using the Remote Control Quick start Electronic Programming Guide (EPG) Provides convenient access to the television programs that will be available in the next 7 days. The information displayed by the EPG is made available by the commercial television networks for digital channels only. The EPG also provides a simple way to program the recording of your favourite programs. There is no need to setup complicated timers. Press [EPG] in your remote controller to display the electronic programming guide.
Changing the TV Settings Using the Installation Guide Menu Installation Guide Mode Setting Home Mode OSD Language English Country Australia Scan Type DTV+ATV Auto Tuning “In Shop Mod, your settings will not be saved.” Are you sure to select Shop Mode? Yes The Installation Guide menu appears the first time you turn on the TV. It will assist you to specify the Mode Settings, OSD Language, Country, Scan Type and Auto Tuning. Ɣ Make sure that you have: Installed the remote control batteries.
Changing the TV Settings Using the Channel Menu CHANNEL Country Australia Tuning Type DTV+ATV Auto Tuning DTV Manual Tuning ATV Manual Tuning Program Edit Ɣ Press [Menu] to open the main menu. Ɣ Press [Ÿ/ź] to select Channel, then press [Ź/OK] to enter the Channel menu. Ɣ Press [Ÿ/ź] to select an option. Ɣ Press [Ż/Ź] to adjust the option or press [Ź/OK] to enter the submenu. Ɣ Press [Menu] to return the previous menu. Ɣ Press [EXIT] to terminate this menu.
Changing the TV Settings Using the Channel Menu ATV Manual Tuning -In Analog signal source Manual Install is only needed when analogue channels are not found with an automatic tuning. Press [ / ] to select ATV Manual Tuning, then press [ /OK] to enter ATV Manual Tuning menu. Press [ / ] to select search then press [ / ] to being tuning. Storage - You can select the channel 1……100 . Color System - Select AUTO for automatic setup of the colour system.
Changing the TV Settings Using the Picture Menu PICTURE Color Temperature Noise Reduction PICTURE Dynamic Picture Mode Brightness 50 Contrast 50 Color 50 Sharpness 50 Tint 50 Back Light 100 Normal Medium Ɣ Press [Menu] to open the main menu. Ɣ Press [Ÿ/ź] to select Picture, then press [Ź/OK] to enter the Picture menu. Ɣ Press [Ÿ/ź] to select an option. Ɣ Press [Ż/Ź] to adjust the option or press [Ź/OK] to enter the submenu. Ɣ Press [Menu] to return the previous menu.
Changing the TV Settings Using the Sound Menu SOUND Sound Mode Standard Equalizer Balance Auto Volume Off SPDIF Output AC3 Lip-Sync 5 Ɣ Press [Menu] to open the main menu. Ɣ Press [Ÿ/ź] to select Sound, then press [Ź/OK] to enter the Sound menu. Ɣ Press [Ÿ/ź] to select an option. Ɣ Press [Ż/Ź] to adjust the option or press [Ź/OK] to enter the submenu. Ɣ Press [Menu] to return the previous menu. Ɣ Press [EXIT] to terminate this menu.
Changing the TV Settings Using the Option Menu OPTION OSD Language Enlish Audio Language Subtitle Language Blue Screen Off Installation Guide Off Time OSD Settings Ɣ Press [Menu] to open the main menu. Ɣ Press [Ÿ/ź] to select Function, then press [Ź/OK] to enter the Function menu. Ɣ Press [Ÿ/ź] to select an option. Ɣ Press [Ż/Ź] to adjust the option or press [Ź/OK] to enter the submenu. Ɣ Press [Menu] to return the previous menu. Ɣ Press [EXIT] to terminate this menu.
Changing the TV Settings Using the Option Menu OPTION Restore Factory Default PVR File System Auto-Light Off Software Update (USB) 3D Setting Version V00.01.00a.B1109 Ɣ Press [Menu] to open the main menu. Ɣ Press [Ÿ/ź] to select Function, then press [Ź/OK] to enter the Function menu. Ɣ Press [Ÿ/ź] to select an option. Ɣ Press [Ż/Ź] to adjust the option or press [Ź/OK] to enter the submenu. Ɣ Press [Menu] to return the previous menu. Ɣ Press [EXIT] to terminate this menu.
Changing the TV Settings Using the Option Menu ■ Auto-Light - Set DBC (Dynamic Backlight Control) option on to enable Auto-Light. This feature increases the dynamic contrast ratio, that is the relative light intensity between black and white areas of the image. Some video content may produce brightness flickering, in which case DBC should be turned off. ■ Software Update (USB) - Software updates are only required when your TV is not functioning due to corruption of internal software.
Changing the TV Settings Using the Option Menu 3D Switch 3. Press menu key to return after completion. 3D Format Format adjustable manually is Side-By-Side, Top-Botton. After setting up 3D switch as ON: TV. Note: 1. You must select the appropriate format in accordance with the format of the picture., the image will be displayed according to Dot to Dott. That is to say, the size of image on the screen will be consistent with the resolution ratio of signal itself.
Changing the TV Settings Using the Option Menu 3D to 2D or reduce your eyesight. 9. Photosensitive epilepsy alarm and other healthy risks. (1) Some watcher may catch unexpected epilepsy or stroke when they are watching some flicker image or light of video picture or video games. If you have family medical history of epilepsy or stroke, please consult the medical experts before using 3D functions.
Changing the TV Settings Using the Lock Menu LOCK Lock System Off Change Password Block Program Parental Guidance No Block Ɣ Press [Menu] to open the main menu. Ɣ Press [Ÿ/ź] to select Lock, then press [Ź/OK] to enter the Lock menu. Ɣ Press [Ÿ/ź] to select an option. Ɣ Press [Ż/Ź] to adjust the option or press [Ź/OK] to enter the submenu. Ɣ Press [Menu] to return the previous menu. Ɣ Press [EXIT] to terminate this menu. When you first use this function, the default password is [0000].
Changing the TV Settings Using the Screen Menu SCREEN H.Position V.Position H.Size 0 0 -50 V.Size 0 Phase -5 Clock 0 Ɣ Press [Menu] to open the main menu. Ɣ Press [Ÿ/ź] to select Screen, then press [Ź/OK] to enter the Screen menu. Ɣ Press [Ÿ/ź] to select an option. Ɣ Press [Ż/Ź] to adjust the option or press [Ź/OK] to enter the submenu. Ɣ Press [Menu] to return the previous menu. Ɣ Press [EXIT] to terminate this menu. Auto Adjust ■ H. Position - Adjust the horizontal position of the image. ■ V.
Changing the TV Settings PC Setting PC Setting Set the PC Software properly to match one of the below options. Supported VGA Modes: VGA____ (640×480 60Hz) SVGA___ (800×600 60Hz) XGA____ (1024×768 60Hz) SXGA___ (1280×1024 60Hz) Note: Your PC/Notebook may not be able to display some of these resolutions. Take Windows XP as an example, and the Windows system display setting is as illustrated: 1. Right click anywhere on your display, select 'Properties'. 2.
Changing the TV Settings Using the DMP Menu C: USB Information File Name: ALL ISP_Tool_4505 _MSTPVR LTDN46T28GA 20070516_21_ tek00000.png tek00001.png tek00003.png tek00004.png 2007_05_170_ MOVIE MUSIC PHOTE TEXT 1/4 tek00002.
Changing the TV Settings Using the DMP Menu ■ Watching a movie Select the MOVIE option. ● Press [▲/▼/◄/►] to select a movie, press [OK] to enter, then press [Play/Pause] to play the movie. Also you can select more than one movie at the same time, press [Play/Pause] to play all the movies. ● Press [◄◄ /►►] to set the play speed "fast back" or "fast forward". ● Press [ I◄◄/►►I ] to select preview or next. ■ Reading a text file Select the TEXT option. ● Press [▲/▼/◄/►] to select a TEXT, press [OK] to enter.
Changing the TV Settings Using the DMP Menu 11 10 Tool Bar Menu: If you've opened a photo, press [Menu] to open the play menu Tool Bar, the following items will be available: (1) - Back - Select previous photograph. (2) - Forward - Select next photograph. (3) - Rotates the photograph clockwise. (4) - Rotates the photograph anti clockwise. (5) - Press [Play] to enter and open the photograph - also for PAUSING the slide show. (6) - Stop - Returns to Thumbnails screen. (7) - Zoom in - enlarges the image.
Appendix Trouble shooting If you feel there's a problem with your TV, you can try turning off the TV then restart it. You can also check below chart of remedies. If the problem isn't resolved, please contact ph 1800 447 367. for further assistance. Symptom Remedy ● No sound or picture 1. Check if the power line is in the outlet and if it has electricity. 2. Check if you have pressed Power button on the TV or Power button on the remote control. 3. Check the setting of picture brightness and contrast. 4.
Appendix Specifications Model HL32K316L3D HL42K316PZL3D HL50K316PZL3D 32 inches 42 inches 50 inches 1366x768 Pixels 1920x1080 Pixels 1920x1080 Pixels Screen Diagonal Size Screen Resolution Power Consumption Refer to the rating label.
HL32K316L3D HL42K316PZL3D HL50K316PZL3D Http://www.hisense.com.