Use and Care Guide

Installing the water lines
In order for the ice maker to operate properly,
a water line is required.
You may need to purchase a water purifying
system to do that.
The water connection must be made by a
qualified plumber.
If the refrigerator is installed in an area with low
water pressure (below 30psi/207KPa), you can
install a booster pump to compensate for the
low pressure.
-the maximum inlet water pressure is
101.5psi/700kPa;
-the minimum inlet water pressure is
30psi/207kPa.
Important:Operation outside the water
pressure range may cause malfunction and
severe,damaging water leaks.
Note:If the water pressure is less than what is
required, ice cubes could be hollow or
irregularly shaped.