Operation Manual

Fine tuning [Menu, Channel , Fine Tune]

Under poor reception conditions, or when receiving analogue signals from distant TV stations, the picture quality might

be improved by using the Fine Tune option of the Channel submenu. Select Fine Tune and adjust to display the best

effect image using [v+/-] button. (Applicable for Analogue transmission only)

Editing Program Settings [Menu, Channel , Edit]

Program numbers assigned to TV channels in memory can be changed in Edit Program OSD, you can LOCK, Skip, add

to Favorite or Rename your programs which are installed and stored. (Renaming of channels only available in Analogue

only, digital channels cannot be re-named)

1. Press [Menu] button to display the main OSD options.

2. Press [P+/-] button to select Channel item, and press the [OK/V+] button to enter.

3. Press the [P+/-] button to select Edit Program, and press the [OK/V+] button to enter Edit Program

submenu.

4. Press the [P+/-] button to select which Channel No. you want to edit, and

use Red button to set Lock programs,

use Green button to set Skip programs,

use Yellow button to set Lock programs,

use Blue button to set Rename programs. (Analogue ONLY)

If editing an analogue channel name, do so by pressing the blue button. Either select a number (0_9) or press again to

select a letter.

e.g.

1 (A,B,C)

2 (D,E,F)

pressing '1' 3 times will display the letter C. press [V+] to move to the next letter space and repeat until desired channel

name is displayed.

After your setting:

The channels which are set to 'Lock' cannot be changed or modified.

The channels which are set to 'Skip' will not be displayed in normal browsing of channels [P+/-], but they also can be

selected by pressing the corresponding channel number.

The channels which are set Favorite can be selected via a special 'Favorite OSD' by pressing the [FAV] button directly.