User Manual

In case the drain hose is installed as shown below:
Unhook it only from the right clip (see arrow)
Connect the drain hose to the Drain or hook it over
the edge of a sink by means of the "U" bend.
Fit the “U” bend show in E, if not already installed, if
it at the end of the drain hose.
Ensure that there are no kinks in the drain hose.
Secure the hose so that it cannot fall down. After
wash phase, machine will drain out hot water.
Small hand basins are not suitable.
To make an extension use a hose of the same type
and secure the connections with clips.
Max. Overall drain hose length: 2.50 m.
6. Connect the drain hose
7