User Manual

Pull out transportation bolt together with rubber part and plastic part.
To ensure safety and reduce noise, you should install the transportation bolt
cover supplied with the unit (see the annex accompanying the unit). Lean
and place the transportation bolt into hole and press it following the shown
direction until it clicks.
The appli
ance must be installed on a solid and level floor surface (if necessry
use a spirit level). If the appliance is to be installed on a wooden floor, distribute
the weight by placing it on a 60x60cm sheet of plywood at least 3cm in
thickness and secure it to the floor. If the floor is uneven, adjust the 4 leveling
feet
as required; do not insert pieces of wood etc. under the feet.
3.
Adjustment of the feet
4