R 81cm LCD COLOUR TV LCD3204EU USER'S MANUAL Part No: IES050409
WELCOME TO THE PERFECT VIEW WORLD OF HISENSE LCD TV Dear customer, Thank you for choosing this LCD Colour TV. We expect our product and service will comfort you for long. This manual is to guide you to set up and operate your TV as quickly as possible. Please read all the safety and operation instructions carefully before you begin and then follow what the handbook tells. SAFETY CLASS This is an IEC safety class I product and must be grounded for safety. CONTENTS Important safeguard . . . . . . . . . . .
IMPORTANT SAFEGUARD WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. FIRE AND SHOCK PRECAUTIONS Adequate ventilation must be provided to prevent heat build up inside unit. Keep the inside of unit free from foreign objects, such as hairpins, nails, paper, etc. Do not build the set into a bookcase or other enclosures in which it would be poorly ventilated. Do not place it on carpet or a bed as low ventilation boles could become obstructed.
OSD language Settings When you start using your set for the first time, the Plug & play menu will be displayed on the screen as shown on the right. 1.Press the [CH+ or CH-] button to select the OSD language. 2.Press the [VOL+ or VOL-] button to select the language that you want to use. Plug & Play OSD language English Teletext Language West Europe Colour system SECAM Sound system AUTO Auto search Notes: The Plug & Play menu is only displayed once when you turn on the TV.
Preparation for Using your new TV Selecting a location for the TV 1)Place TV on the floor or on a sturdy platform in a location where light does not directly hit the screen. 2)Place TV far enough from the walls to allow proper ventilation. Inadequate ventilation may cause overheating, which may damage the TV. NOTE: Please contact local dealer for wall mounting. Learning about your TV You can operate your TV by using the buttons on the front panel or the remote control.
Preparation for Using your new TV C1 VIDEO INPUT AUDIO/L OUTPUT AUDIO/R 11 12 SCART1 [VIDEO IN/OUT(CANEL+) RGB IN] 1 13 C1 1 SCART2 [VIDEO IN/OUT Y/C/N] 1 14 C2 C2 S-VIDEO INPUT 1 15 B COMPONENT VIDEO INPUT 1 16 AC INPUT R 24 L R 1 17 AUDIO INPUT [COMPONENT] 1 L R 1 18 AUDIO INPUT [VGA DV] EARPHONE EARPHONE OUTPUT OUTPUT 1 19 ANT 75 11 12 13 14 15 16 17 22 21 20 AV input AV output Scart1 connector 20 Scart2 connector S-VIDEO input COMPONENT VIDEO input 23 18 COMPON
Preparation for Using your new TV Connecting your TV Caution: Do not plug the TV in until you have finished connecting all of your equipment. Connecting to A/V equipments To enjoy its multimedia features, you can connect your TV to A/V equipments such as VCR, DVD, STB, Satellite receiver, Camcorder, Audio amplifier etc., and select signal sources using your remote control. Connect the devices as shown below.
Preparation for Using your new TV RGB line L COMPONENT VIDEO INPUT B R R L R AUDIO INPUT [VGA DV] S-VIDEO INPUT C2 AUDIO INPUT [COMPONENT] PC/NB EARPHONE EARPHONE OUTPUT OUTPUT ANT 75 R L AUDIO To speaker To VGA Audio line NOTE: PC mode support resolution: VGA, SVGA, XGA, SXGA. Connecting to an antenna To enjoy the terrestrial signal transmitted by your local TV station, you need an indoor or outdoor antenna (not supplied).
Using the remote control Preparing the remote control for use Installing the remote control batteries 1. Open the battery cover on the back of the remote control. 2. Install two AAA size(1.5V) batteries. Match the + and - signs on the batteries to the signs on the battery compartment. 3. Close the battery cover. Note: 1.Dispose of your batteries in a designated disposal area. Do not throw batteries into fire. 2.Do not mix battery types or combine used batteries with new ones. 3.
Using the remote control Learning about the remote control : Power on/off Channel Number : Direct channel selection FAST TEXT buttons : Return to previous channel : Display current input : Select picture mode Text TEXT : Teletext mode : Channel up : Volume down : Volume up : Channel down : Call up the main menu : Select sound mode : Make the volume to zero : S-VIDEO mode : Freeze picture Zoom : Ajust zoom ration : Switch to TV,SCART1, AVand SCART2 mode : Component mode : Mono/Stereo Zoom St
Using the TV features Understanding the TV features Multimedia - TV receiver, Video monitor and PC display, all in one. Wider viewing angle, 16:9 display - 176 viewing angle at typical value Digital display device - truthfully reproducing the images, without distortion or blurring, irrespective of magnetic or geomagnetic effect.
Using the TV features Select channels by numbers To select a channel : Press the channel numbers in series to select channel directly. For example, to select channel 120, Press the button 1, and 1_ _ will display on the top right corner of the screen, then press the button 2, 12_ will display, press the button zero, you can enjoy the program of channel 120. NOTE: 1) When you changing the channel, the sound mode will be displayed below the channel number. There are 3 sound states in this TV.
Using the TV features Using the CHANNEL menu PROGRAM 1) Press 2) Press 3) Press 4) Press [MENU] button to enter main menu. [VOL+ or VOL-] button to select the item CHANNEL. [CH+ or CH-] button to select PROGRAM. [VOL+ or VOL-] button to select the channel. CHANNEL PROGRAM SOUND SYSTEM Sound system AUTO SEARCH You can set sound system. 1) Press [MENU] button to enter main menu. 2) Press [VOL+ or VOL-] button to select the item CHANNEL.
Using the TV features Using the PICTURE menu PROGRAM Adjust picture settings PICTURE PARAMETERS 1) Press [MENU] button to enter main menu. 2) Press [VOL+ or VOL-] button to select the item PICTURE PARAMETERS. 3) Press [CH+ or CH-] button to select the item you want to adjust. 4) Press [VOL+ or VOL-] button to adjust the level. 5) The data adjusted is memorised automatically in the user mode. NOTE : The COLOUR TEMP is only to be adjusted in the PC mode. .
Using the TV features Using the MENU LOCK SETTINGS menu LOCK MENU MENU LOCK SETTINGS 1) Press [MENU] button to enter main menu. 2) Press [VOL+ or VOL-] button to select the item MENU LOCK SETTINGS. 3) Press [CH+ or CH-] button to select LOCK MENU. 4) Press [VOL+ ] button to enable LOCK MENU. LOCK MENU SET PASSWORD SET PASSWORD Password is a four-digit number. The preset password is 1111. If you want to change the password, you must enter the current password.
Using the TV features Using the GENERAL SETTINGS menu OSD POSITION GENERAL SETTINGS 1) Press [MENU] button to enter main menu. 2) Press [VOL+ or VOL-] button to select the item GENERAL SETTINGS. 3) Press [CH+ or CH-] button to select OSD POSITION. 4) Press [VOL+ or VOL- or CH+ or CH-] button to adjust OSD POSITION. LANGUAGE OSD POSITION COLOUR SYSTEM OSD LANGUAGE BLUE SCREEN SLEEP TIMER COLOUR SYSTEM TRANSPARENCY DEINTERLACER You can set colour system. 1) Press [MENU] button to enter main menu.
Using the TV features Using the GENERAL SETTINGS menu DEINTERLACER 1) Press MENU button to enter main menu. 2) Press [VOL+ or VOL-] button to select the item GENERAL SETTINGS. 3) Press [CH+ or CH-] button to select DEINTERLACER. 4) Press [ VOL+ ] button to enter the DEINTERLACER. 5) Press [ CH+ or CH-] button to select the feature. MADI: Motion Adaptive De-Interlacing, by selecting the function, the quality of motion picture will be improved.
Using the TV features Teletext Operations SELECTING TELETEXT MODE Select the channel that is broadcasting the desired Teletext program. Press [ TEXT ] button and alternate between Teletext mode and normal mode. Note: All the operations below should be under the Teletext mode except TIME operation. PAGE SELECTION You can directly input your desired page number by pressing [0~9] buttons. You can sequentially read pages by pressing [ or ] button.
Using the TV features Teletext Operations TIME Time information is contained in the teletext broadcast. In Teletext mode, press [Time] to display the time. FAST TEXT The RED, GREEN, YELLOW & CYAN buttons are used for quick access to colour coded pages transmitted by FAST TEXT broadcast. INDEX Teletext index page guides you quickly to your desired page. Press [ S. Mode ] button to enter index page.
Appendix Troubleshooting Before calling a service technician, please check the following table for a possible cause of the problem and some solutions. Symptoms Possible Solutions TV will not turn on Make sure the power cord is plugged in, then press [Power]. The remote control batteries may be dead. Replace the batteries. No picture, no sound Check if you have set the off timer. Check the antenna/cable connections. Press [Display] to see if you have select the right signal source.
Appendix Cleaning and care WARNING: Do not try to remove the cabinet back. Refer servicing to qualified service technicians. To clean the TV screen: 1) Unplug the TV to avoid possible shock hazard. 2) Use a clean cellulose sponge or chamois cloth dampened with a solution of mild detergent and warm water to clean the TV screen and trim. Do not use too much water as water spilled into the cabinet can cause damage to the TV. 3) Wipe off any excess moisture with a clean dry cloth.
Specifications Screen Size: Native Resolution: Brightness: Contrast Ratio: Colour System: Sound System: Tuner: Antenna: Stereo: VIDEO INPUT: SCART-1 (Video and RGB) SCART-2 (Video and Y/C) AV input COMPONENT PC VGA DVI Audio in 32-inch(81cm)TFT LCD TV 1366 768 Pixels(corresponding to WXGA) 500 cd/m2 600:1 PAL/SECAM B/G, D/K, I, L/L VHF/UHF:48.25~863.25MHz 75 VHF/UHF input NICAM/A2 Video:1 Vp-p, negative sync, 75 input RGB:0.7 Vp-p, 75 input Video:1 Vp-p, negative sync, 75 input .
