R LCD COLOUR TV USER'S MANUAL LCD3704NEU Part No:
CONTENTS The symbol of the dustbin barred means that this apparatus cannot be put at the rebus with not sorted waste domestic running. It is interdict to throw with not sorted waste domestic running, of deposited on the public thoroughfare or at any other place not envisaged to this end. This apparatus contains substances being able to be harmful for the environment. The presence of certain substances can have harmful effects on the environment.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product ' s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER(OR BACK).NO USERSERVICEABLE PARTS INSIDE.
General settings Language Colour system Noise reduce Deinterlacer Factory reset Sleep timer english
Preparation for Using your new TV Selecting a location for the TV 1)Place the TV on the floor or on a sturdy platform in a location where light does not directly hit the screen. 2)Place the TV far enough from the walls to allow proper ventilation. Inadequate ventilation may cause overheating, which may damage the TV. NOTE: Please contact local dealer for wall mounting. Learning about your TV You can operate your TV by using the buttons on the front panel or the remote control.
B B R COMPONENT IN R L R AUDIO IN ANT IN 75 SCART2 SCART1 Note: The above figures are for reference only, please refer to the actual units to determine their appearance.
Preparation for Using your new TV Connecting your TV Caution: Do not plug the TV in until you have finished connecting all of your equipment. Connecting to A/V equipments To enjoy its multimedia features, you can connect your TV to A/V equipments such as VCR, DVD, STB, Satellite receiver, Camcorder, Audio amplifier etc., and select signal sources using your remote control. Connect the devices as shown below.
Preparation for Using your new TV RGB line PC/NB B To speaker B R COMPONENT IN R L R AUDIO IN C ANT IN 75 To VGA Audio line Connecting to an antenna To enjoy the terrestrial signal transmitted by your local TV station, you need an indoor or outdoor antenna (not supplied). Perfect picture quality requires a good signal and generally means that an outdoor antenna must be used. The exact type and location of the antenna will depend on your particular area.
Using the remote control Preparing the remote control for use Installing the remote control batteries 1. Open the battery cover on the back of the remote control. 2. Install two AAA size(1.5V) batteries. Match the + and - signs on the batteries to the signs on the battery compartment. 3. Close the battery cover. Note: 1.Dispose of your batteries in a designated disposal area. Do not throw batteries into fire. 2.Do not mix battery types or combine used batteries with new ones. 3.
Using the remote control Learning about the remote control - 8-
Using the TV features Understanding the TV features Multimedia - TV receiver, Video monitor and PC display, all in one. Wider viewing angle, 16:9 display - 176¡ã viewing angle at typical value Digital display device - truthfully reproducing the images, without distortion or blurring, irrespective of magnetic or geomagnetic effect.
Using the TV features Select channels by [CH+/CH-] You can also use[CH+ / CH-] to select channels. [CH+] indicates channel number increase; [CH-] indicates channel number decrease. Select channels by numbers To select a channel : Press the channel numbers in series to select channel directly.
Using the TV features Using the TV settings menu Program 1) Press the [MENU] button to enter the main menu. 2) Press the [VOL+ or VOL-] button to select the item TV settings. 3) Press the [CH+ or CH-] button to select Program. 4) Press the [VOL+ or VOL-] button to select the present channel. Tv settings Sound system You can set sound syetem. 1) Press the [MENU] button to enter the main menu.
Using the TV features Using the Picture menu PROGRAM Adjust picture settings Picture parameters 1) Press the [MENU] button to enter the main menu. 2) Press the [VOL+ or VOL-] button to select the item Picture Parameters. 3) Press the [CH+ or CH-] button to select the item you want to adjust. 4) Press the [VOL+ or VOL-] button to adjust the level. 5) The adjusted data is stored automatically in the user mode. NOTE : The Colour temp is only to adjust in the PC mode. .
Using the TV features Using the OSD settings menu OSD position OSD settings 1) Press the [MENU] button to enter the main menu. 2) Press the [VOL+ or VOL-] button to select the item OSD settings. 3) Press the [CH+ or CH-] button to select OSD position 4) Press the [VOL+ or VOL- or CH+ or CH-] button to adjust the OSD POSITION OSD position OSD timeout OSD language OSD lock OSD timeout Transparency 1) Press the [MENU] button to enter the main menu.
Using the General settings menu Language Noise reduce 1) Press the MENU button to enter the main menu. 2) Press the [VOL+ or VOL-] button to select the item General settings 3) Press the [CH+ or CH-] button to select Noise reduce. 4) Press the [ VOL+ ] button to enter the Noise reduce. 5) Press the [ CH+ or CH-] button to select Low / Middle / High . Deinterlacer 1) Press the MENU button to enter the main menu.
Using the TV features Using the PC menu PC Parameters 1) Press the MENU button to enter the main menu. 2) Press the [VOL+ or VOL-] button to select the item PC Parameters. 3) Press the [CH+ or CH-] button to select the item you want to adjust. Auto LANGUAGE ENGLISH Clock NOTE: 1)The menu is useful only on VGA/DVI and HDTV mode. Phase It is useless in others mode. 2) The button [AUTO] is used to adjust position of picture Position automatic and it is effective only on VGA/DVI mode.
Using the TV features Teletext Operations Sub code Some Teletext pages contain sub page that require you to input the sub code. Press [ Zoom ] button until ***|**** is displayed, and enter last four-digit sub code for the sub page you need. Mix You can mix Teletext with TV pictures, which means transparent teletext. Press [ Swap ] to mix, and press [ Swap ] again to cancel the mixed effect. Size (top/bottom/full) Press the [ PC ] button to display the TOP HALF of the page.
Also known as Peritel, this standard provides a cheap multi-signal connector to domestic TV and other video equipment. Arrangement 1 is the original and allows for composite video input/output, RGB inputs and stereo audio input/output. Arrangement 2 allows for composite video input/output,and stereo audio input/output. Cation:The output of video and audio are always from turner of R F. Arrangement 3 allows for composite video input, S-Video inputs,and stereo audio input/output.
SCART arrangement 2 Pin Signal Signal level Impedance 1 Audio output B (right) 0.5V rms <1kohm 2 Audio input B (right) 0.5V rms >10kohm 3 Audio output A (left) 0.
SCART arrangement 3 Pin Signal Signal level Impedance 1 Audio output B (right) 0.5V rms <1kohm 2 Audio input B (right) 0.5V rms >10kohm 3 Audio output A (left) 0.5V rms <1kohm 4 Ground (audio) - - 5 Ground - - 6 Audio input A (left) 0.5V rms >10kohm 7 - - - 8 Function select (AV control) High (9.5-12V) - AV mode Mid(5-8V)-Wide-screen >10kohm - - 10 - - - 11 - - - 12 - - - 13 Ground (Chrominance) - - 14 Ground (blanking) - - 15 Chrominance input 0.
Troubleshooting Before calling a service technician, please check the following table for a possible cause of the problem and some solutions. Symptoms Possible Solutions TV will not turn on Make sure the power cord is plugged in, then press [Power]. The remote control batteries may be dead. Replace the batteries. No picture, no sound Check if you have set the off timer. Check the antenna/cable connections. Press [Display] to see if you have select the right signal source.
Specifications LCD panel 940.
