Instruction manual

Check the door is
aligned horizontally
and vertically and that the
door seals are secure on all
sides before finally
tightening.
Re-adjust the levelling
foot. See Levelling the
Refrigerator on page 2
REVERSING THE DOOR SWING
• Ensure the Refrigerator is empty, switch andoff
unplug the Refrigerator from the mains supply.
• We recommend you have someone to assist you.
You may find it useful to securely lean the
•
Refrigerator back against a wall but be very
careful not to damage the fragile refrigeration
pipes.
Tools required
• Phillips style screwdriver
• Small adjustable spanner
Small flat bladed screwdriver
•
Unscrew and remove the adjustable foot on the
right hand side.
With the flat blade screwdriver carefully remove
the cover from the top hinge bracket.
Unscrew the 2 retaining screws using the Phillips
screwdriver. Support the door and remove the top
bracket. Lift to remove the door and put it in a safe
place.
the plastic blanking plate to the opposite side of
Using the flat blade screwdriver remove and refit
the cabinet.
edge of the door to the opposite
site.
Remove and refit the blanking plate from the top
Replace the adjustable foot to the right hand side and
door onto the bottom hinge pin, ensuring that
the edge is in l
refit the
ine with the edge of the Refrigerator
compartment.
1
2 3
4 5
7
8
Unscrew the two retaining bolts and small front
foot from the bottom bracket and to remove it,
refit onto the opposite side of the cabinet.
6
Replace the cover onto the top bracket.
Hold the door in place and refit the top bracket.
9
10
7