R COLOUR PLASMA DISPLAY TV USER'S MANUAL PDP4219EU PDP4212EU Part No:
OSD Language Settings Using the GENERAL SETTINGS menu When you start using your set for the first time, you may need to select the language that you want to use. OSD LANGUAGE 1) Press the
WELCOME TO THE BRIGHT AND VIVID WORLD OF PDP TV Dear customer, Thank you for purchasing this Plasma Display TV. We wish you many years of viewing pleasure. The goal of this manual is to guide you through setting up and operating your TV as quickly as possible. Please read all the safety and operating instructions carefully before you begin. SAFETY CLASS This is an IEC safety class I product and must be grounded for safety. CONTENTS Important safeguard . . . . . . . . . . . . . . . . . . . . . . . . . . . .
IMPORTANT SAFEGUARD FIRE AND SHOCK PRECAUTIONS Adequate ventilation must be provided to prevent heat build up inside unit. Keep the inside of unit free from foreign objects, such as hairpins, nails, paper, etc. Do not build the set into a bookcase or other enclosures in which it would be poorly ventilated. Do not place it on carpet or a bed as low ventilation boles could become obstructed. Do not set liquids, including flower vases and vessels filled with chemicals or water etc.
Preparation for Using your new TV Selecting a location for the TV 1)Place the TV on the floor or on a sturdy platform in a location where light does not directly hit the screen. 2)Place the TV far enough from the walls to allow proper ventilation. Inadequate ventilation may cause overheating, which may damage the TV. NOTE: Please contact local dealer for wall mounting. Learning about your TV You can operate your TV by using the buttons on the front panel or the remote control.
Preparation for Using your new TV MENU button Source select RS 232 Debug Input DVI Input PC VGA Input Volume down / cursor left Volume up / cursor right Channel down / cursor down Channel up / cursor up Power indicator Remote Sensing Window AC Power Outlet YPbPr/YCbCr Input Video Input (RCA) TV Antenna Input PC Audio Input Ear Phone Output Video Output (RCA) 23 Audio Output L+R (RCA) Audio Input L+R (RCA) SCART1 : Input (CVBS/RGB/Audio L+R) Output(CVBS/Audio L+R) SCART2 : Input (CVBS/Audio L+R) Output(
Preparation for Using your new TV Connecting to A Computer You can use your TV as a monitor/speakers for your computer by connecting through its 15pin standard RGB interface and PC audio interface. Connect the devices as shown below. RGB line PC/NB PC AUDIO INPUT To speaker To VGA To DVI Audio line Connecting to an antenna To enjoy the terrestrial signal transmitted by your local TV station, you need an indoor or outdoor antenna (not supplied).
Using the remote control Preparing the remote control for use Installing the remote control batteries 1. Open the battery cover on the back of the remote control. 2. Install two AAA size(1.5V) batteries. Match the + and - signs on the batteries to the signs on the battery compartment. 3. Close the battery cover. Note: 1.Dispose of your batteries in a designated disposal area. Do not throw batteries into fire. 2.Do not mix battery types or combine used batteries with new ones. 3.
Using the remote control Learning about the remote control 1 Power : Power on/off PIP 3 2 1 Sub.Ch. 4 6 5 Swap 7 9 8 Main Ch. Recall 1 0 Dispaly P.Mode Text S.Mode 1 Mute Sub.Code Reveal Zoom Still QQ.V I II Index Hold Size Video S-Video PC Cancel Mix YPbPr DVI Time Channel Number :Direct channel selction Red/PIP : Fast text/ Select the OFF/PIP/POP Mode Green/Sub.Ch.: Fast text / Select Sub. Picture source Yellow/Swap : Fast text /Swap between Main and Sub.
Using the TV features Understanding the TV features Multimedia - TV receiver, Video monitor and PC display, all in one. Wider viewing angle, 16:9 display - over 160 viewing angle, 16:9 ergonomical display panel Digital display device - truthfully reproducing the images, without distortion or blurring, irrespective of magnetic or geomagnetic effect. 200 channels storage Sleep timer Teletext with 252 pages memory NICAM Dual SCART interface Multi-language OSD Basic Operations Power ON/OFF 1.
Using the TV features Select channels by or In TV source, You can use or on the remote control to change channels. indicates channel number increase; indicates channel number decrease. You can use or on the control board to change channels. indicates channel number increase; indicates channel number decrease. Select channels by numbers To select a channel : Press the channel numbers in series to select channel directly.
Using the TV features Using the CHANNEL menu CHANNEL NUM CHANNEL 1) Press the
Using the TV features Using the PICTURE menu PROGRAM Adjust picture settings 1) Press the
Using the TV features Using the PIP menu PICTURE IN PICTURE Select PIP SIZE 1)Press the
Using the TV features Using the GENERAL SETTINGS menu GENERAL SETTINGS OSD POSITION 1) Press the button to enter the main menu. 2) Press the or button to select the item GENERAL SETTINGS. 3) Press the or button to select OSD POSITION and press enter it . 4) Press the or button to adjust the OSD POSITION. 5) Press the
Using the TV features Teletext Operations ENTER TELETEXT MODE Select the channel that is broadcasting the desired Teletext program. Press < Text> button on the remote control to enter the Teletext mode ,and press the same button quit the Teletext mode.. Note:1)All the operations the below should be under the Teletext mode. 2)There are some multiplex buttons on the remote control for Teletext operation. PAGE SELECTION You can directly input your desired page number by pressing <0>~<9> buttons.
Appendix Scart connector See Signal Source Selection on page 8 for selecting SCART input.
Appendix Troubleshooting Before calling a service technician, please check the following table for a possible cause of the problem and some solutions. Symptoms Possible Solutions TV will not turn on Make sure the power cord is plugged in, then press . The remote control batteries may be dead. Replace the batteries. No picture, no sound Check if you have set the off timer. Check the antenna/cable connections. Press [Display] to see if you have select the right signal source.
Specifications Diagonal display size 42.0 INCHES PDP Television system Multi- standard(PAL,SECAM) Channel coverage VHF-L: E2-S8 VHF-H: S9-S37 UHF: S38-E69 Resolution 852X480 Contrast 10000:1 Brightness 1500cd/m Viewing angles 170 (H)/170 (V) Power source AC100V--240V, 50/60Hz Power consumption 330W Audio output 7W+7W RF input: VIDEO input: Dimensions Weight 1043mm X 640mm X 85mm 33.
