:J;) 2021 Hisense Company Ltd. All Rights Reserved All material in this Quick Setup Guide is the property of Hisense Company Ltd. and its subsidiaries, and is protected under US. CANADA, MEXICO and lntmnational copyright and/or other inte:llnctual propnrty laws. Rnproduction or transrT1ission of thn matmials, in wholn or in pa1·t. in any mannnr, C:lnctronic, print, or othnrwisn, without thn prior written consent of Hisense Company Ltd. is a violation of I liscnse Company Ltd.
Congratulations on the purchase of your new Laser Cinema! This Quick Setup Guide will walk you through a few easy steps to set up your Laser Cinema. Table of Contents l~egister Your Laser Cinema' 2 Important Safety Information 3 Packagnd Cont,:nts 5 Laser Cinema Diagram 6 S I EP I Mount the Screen STEP 2. Set up the I aser Cinema 7 STEP 3. Adjw,t the Display Image arid the Screen 11 STEP 4.
Register Your Laser Cinema! Because we value your business, we want to keep you in the know of 'all things Hisense'. Using your mobile phone, scan the Registration page QR code to register your Laser Cinema. Depending on the make and model of your phone, you may need to download a QR code scanning app. U.S. http://www.hisense-usa.com/support/ register Mexico https://hisense.com.mx/support/register 2 Canada http://www.hisense- canada.com/ support/productReg.
Important Safety Information . & .SAFETY WARNINGS Do not look directly at the lens when this device is on! • This product comes with a laser module. Do not tear or modify this device in any manner; otherwise, it may result in personal injury.
• If this device has been in a warm environment. allow any built up condensation to evaporate first BEFORE you switch the device on. • Do not allow a child to stand on or climb up this device. • Do NOT place any objnct abovn or in front of thn Inns bncausn thn laser light could cause, thn objnct to bncorTw flarrnnable.
Packaged Contents • Laser Cinema • 1 Audio Out Cable: • I Remote control • Hise:nse: L1 K Lase:r Cine:ma Quick Setup Guide • 2 AAA batteries • lr-r1portant Safety Information & Warranty Card • 2 pairs of gloves for handling the Laser Cinema • Cleaning kit for the lens • 1 Powm Cord • 2 C-shapod blocks • I Wrench to adjust the bottom of the Laser Cinema • C shaped Block Installing Instruction 5
Laser Cinema Diagram Power Indicator Air vents Remote control receiver Eye protection sensor Eye protection sensor Lens with laser Power button We strongly recommend that two people handle this device when moving it from one place to another. Be sure to protect the lens when you handle this device.
STEP 1 Mount the Screen If you purchased a screen from Hisense to include with your Laser Cinema, then refer to the Screen Installation Guide that's included in the package. STEP 2 Set up the Laser Cinema To begin setting up the Laser Cinema, we strongly recommend that TWO people move it from one place to another because of the weight. Be sure to protect the lens when you handle this device. 1. Now.
Ports to connect certain cables to Outdoor VHF/UHF antenna Coaxial VHF/UHF Antenna (@) Cable ANT OUT HDMI 2 4K0120Hz HDMI 1{eARC) 4K@120Hz use 2 oc 5V:::--1A(MAX} CJ 0 /""""::::::::::::::::::::==:::::::- - -I-- - - - - --&- It may be used to connect to a home automation system Q .,. SERIAL 0 AUDIO our SER\IICE 2 or Custom Integrated Audio/Video (A/V) system. It is recommended that it should only be completed by a professional installer.
External AV d~~~~~~---------------------: ;----------,-~H~1 - ~ S•=x giJ~ 10• ~~~~~I : 0 DVD Player : l ~i l~@~c:::=:::J- 1 HDMI r----- il, g ' :i, I VCRl"n.,,1-oo [©1==========--- !I" v;aeo came,a ' Satellite Receiver - - - - - - - - - - - - - - - - - - - - - - - . ------- ~J-- - -~ -i~~f ~ M~ W~ ~ -~~t~rnal audio devices ~=~WRhe~idtee audio adapter Speakers IJol6JoJ•I Audio A~~~~~~ __ .
USB devices for browsing photos, music and movies. This unit only recognizes USB Memory Sticks. USB 1 DC SV::::::0.5A(MAX) NOTE: Use the USB extension cable (included) for easier connection and disconnection. o"O D ~•-"'____ , •"'-'-'°-"'~ □ ANT/OBLE DIGITAL HDMI 2 HDMI l(eARC) use 2 ~----~ Qo□ c:J O·· OUT SERVICE 2 When connecting a hard disk or a USB hub, always connect the mains adapter of the connected device to the power supply. Exceeding a total current consumption may result in damage.
STEP 3 Adjust the Display Image and the Screen Follow the steps in the order shown below, only if they apply to your situation. Note: Before adjusting, fold the wall-mount bracket wands so that screen is vertically level. Rotate feet from an overlooking view, but do not look directly at the lens when this device is on because the laser light may damage your eyes.
• If the bottom of the image is wider than the screen, then ADJUST THE UPPER-RIGHT CORNER OF THE IMAGE 1. If the top of the image is lower on the left and higher on the right, then use the wrench to rotate the front-right foot and the back-right foot clockwise to the same height. move the Laser Cinema closer to the screen. back-right foot / I n-1,---------.-~ I ~--------------~ If the bottom of the image is narrower than the screen, then move the Laser Cinema farther from the screen.
4. If the upper-right corner is inside the screen after adjusting, 2. Now, rotate the Laser Cinema clockwise so that the bottom of use the wrench to rotate the front-right foot and the back- the image is parallel with the screen. right foot counterclockwise to the same height, and rotate the Laser Cinema clockwise, to make the image parallel with the screen. ADJUST THE UPPER-LEFT CORNER OF THE IMAGE 1.
FILL THE TOP OF THE IMAGE TO THE SCREEN If the top of the imge is wider than the screen, then use the wrench to rotate the left- and right-front feet of the Laser Cinema clockwise. +ri==========;::;:i~ I I If the top of the image is narrower than the screen, then use the wrench to rotate the left- and right-back feet of the Laser Cinema clockwise, until the left and right borders of the image are parallel with the screen borders.
STEP 4 Use Your Remote BUTTON INPUT 123 FAV DESCRIPTION BUTTON DESCRIPTION Power on/off C) Display the Home screen Change Laser Cinema input source Enter Channels/input numbers and special function buttons Press to enter your customized input source/app Press and hold to enter customization settings AVOLv ACHv Volume (up/down) .,.
Press and slide the back cover to open the battery • compartr-r1ent of the rer-r1ote control. It can work at a 30 degree horizontal or 15 degree vertical angle.( This angle is used by infrared r-rIeans in an unpaired 2. Insert two AAA size batteries Make sure to match the state) ( 1) and (-) e:nds of the: battmies with the: ( 1) and (-) ends indicated in the battery compartment PAIRING THE REMOTE CONTROL 3. Restore the: battery compartmcmt. I.
STEP 5 Proceed through the Screen Setup Menu 4. Click"+" on your mobile device to take a photo of the entire PROJECTION MODE 5. Click "upload" on your mobile device to complete the screen and image. For best results, stand about 10 feet away from the screen and use landscape mode. If you need to flip the image over top-to-bottom and/or left- automatic geometric correction. to-right, select the Projection Mode and press the UP/DOWN buttons. AUTO GEOMETRIC CORRECTION GEOMETRIC CORRECTION 1.
Text-to-Speech(TTS) and Video Description functionalities on Laser Cinema FOCUS ADJUSTMENT You can adjust the focus parameters by pressing the up and down buttons on the remote. The focus effect is adjusted in real time according to the displayed background image card. Text-to-Speech (TTS) and Video Description can help you to navigate the menus on the screen and hear an audio description of relevant programs.
Maintenance • Do not touch this device when it is running or just turned off because it may be hot. • Do not wipe this device with oil because it may deteriorate the exterior or damage the paint. Contact with rubber or ethylene products for a long time may cause stains on this device. • If the outside of the Laser Cinema is dirty, turn off the Laser Cinema and wipe with a damped soft cloth. • Do not touch the lens with your hands. • Do not touch or wipe the lens with ordinary cleaning cloth.
3. Check to see 1f the LED light 1s 011 or not. If 1t 1s, then the Laser Cinema 1s rece1v111g power. I have connected an external source to my Laser Cinema and I get no picture and/or sound. 1. Check for tJw correct output connection on the external source and for the corre:ct input connection on the Lasm Cine:rT1a. 2. Make sure you have made the correct selection for the input mode for the incoming signal The picture is normal but there is no sound 1. Owck the volume settings. 2.
The remote control does not work 1. Confirm that Laser Cinema still has power and is operational. 2. Change the batteries in the remote control. 3. Check if the batteries are correctly installed. NEED MORE HELP? Additional help is available online at support links. You will find answers to frequently asked questions, downloadable firmware and more. If the problem is still not resolved, then conta ct us at one of the phone numbers below. U.S.A. MEXICO http://www.hisense-usa.com/support/ http://www.
Product Specifications MODEL NAME PXl-PRO DIMENSION (W x H x D) 20.5 x 6.3 x 12.8 inches WEIGHT 20.3 lbs (9.
RECEIVING CHANNELS VHF 2 - 13, UHF 14 - 69, CATV: 1 - 125 Digital Terrestrial Broadcast (8VSB): 2 - 69 Digital cable (64/256 QAM): 1 - 135 TUNER TYPE Frequency synthesized RECEIVING SYSTEM Analog: NTSC Digital: ATSC/QAM Disclaimer: All products, product specifications, and data are subject to change without notice to improve reliability, function, design or otherwise.
Certification and Compliance The Wi-Fi Module complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device should be installed and operated FCC Notice with a minimum distance of 20 centimeters between the radiator and your body. This device has been tested and found to comply with the limits Declaration of Conformity for a Class B digital device pursuant to Part 15 of the FCC Rules.
Hisense English Spanish CAUTION Precauci6n & CAUTION The Following Actions Are Prohibited & Precauci6n Las Siguientes Acciones Estan Prohibidas Do not power on the Laser Console when the temperature is under 41 °F. Do not touch or wipe the lens with your hands or ordinary c leaning cloth. The optical coating will be damaged and this affects the quality of the image. No toque o limpie la lente con sus manos o con un trapo ordinario de limpieza.
Hisense English French CAUTION MISE EN GARDE & CAUTI ON & MISE EN GARD E The Following Actions Are Prohib ited Les actions Suivantes Sont lnterdites Do not touch or wipe the lens with your hands or ordinary cleaning cloth. The optical coating will be damaged and this affects the quality of the image. Ne touchez pas et n'essuyez pas l'objectif de la lentille avec vos propres mains ou avec un chiffon de nettoyage ordinaire. Le revetement optique sera endommage et cela affectera la qualite de !'image. ...
C-shaped Block Installing Instruction Step 4 Move the main unit away and press down on the C-shaped 1. FUNCTION block to ensure it is firmly adhered to the desktop. Paste on the surface of Laser TV or Laser Cinema cabinet, The installation effect is as follows. connect Laser TV or Laser Cinema cabinet and the host by fixing two casters, so as to prevent Laser TV or Laser Cinema host from shifting. 2.INSTALLING Step 1 Take two C-shaped blocks out of the accessory bag.
Hisense Important Safety Information and Warranty Card Please read this thoroughly and keep it for future reference.
Important Safety Instructions A A TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. A The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
End of life directives Your Laser Cinema also contains material that can be recycled and reused. For disposal or recycling information, contact your local authorities or the Electronic Industries Alliance at www.eia.org (for USA), the Electronic Products Recycling Association at http://www.eprassociation.ca (for Canada) to find a recycler in your area. Power source WARNING • Do not use a different power supply cord to plug the Laser Cinema Into an AC outlet.
LIMITED WARRANTY FOR HISENSE® LASER CINEMA Congratulations on your purchase! IMPORTANT: Just in case your newly purchased Hisense® Laser Cinema needs to be serviced, please keep each of the original packaging materials and your original receipt. Damage to a Laser Cinema returned to Hisense for service due to inadequate packaging will void your warranty.
ON-SITE SERVICE: Certain Products are eligible for on-site service at Hisense's sole discretion. To obtain on-site service, Purchaser must call or email Hisense as described above to trouble-shoot the issue with the Product. Hisense customer care representatives may determine Product eligibility based on Purchaser's description of the issue, which may result in a determination that the Product (or part thereof) requires shipment to Hisense's warehouse in lieu of on-site service.
(t) Warranty claims for Products returned with altered, illegible or missing model, factory serial number and regulatory or UL markings. (g) Any Products used for rental purposes, requiring frequent re-installation, or used in harsh environments. (h) Any installation, consumer instruction, delivery, setup, adjustment, and/or programming charges.
NO WARRANTIES (WHETHER EXPRESS OR IMPLIED) INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE SHALL APPLY AFTER THE EXPRESS WARRANTY PERIOD STATED ABOVE, AND NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN (BY ANY PERSON, FIRM OR ENTITY WITH RESPECT TO THE PRODUCT) SHALL BE BINDING ON HISENSE. THIS WARRANTY IS THE EXCLUSIVE WARRANTY WITH RESPECT TO THE PRODUCT AND HISENSE IS THE EXCLUSIVE WARRANTY PROVIDER FOR THE PRODUCT.
IIIIIIIIIIIIIIIIIII IHilllllHI 39463 - 1272922-1111 - 1111
