User's Manual

13
Pair up With The Subwoofer
Automatic pairing
The subwoofer and soundbar will automatically
pair.
NOTE:
- Do not press the Pair button on the
subwoofer, except for manual pairing.
- If the automatic pairing fails, pair the
subwoofer with the main unit manually.
Manual pairing
If no audio from the wireless subwoofer can be
heard, manually pair up the subwoofer.
1 Power up soundbar by remote control or
touch pad.
2
Press soundbar SOURCE key or remote
control key for 5 seconds until the screen
shows “SUB PAIRING”. It is connected when
the LED of subwoofer turns to normal.
3
NOTE:
• The subwoofer should be within 6 m of the
soundbar in an open area (the closer the
better).
• Remove any objects between the subwoofer
and the soundbar.
• If the wireless connection fails again, check
(e. g. interference from an electronic device)
or strong interferences and repeat the above
procedures.
Basic Operation
Standby/ON
socket, the main unit will be in Standby mode.
• Press the
button on the unit or on the
remote control to switch the unit ON.
• Press the
button again to switch the unit
back to STANDBY mode.
• Disconnect the mains plug from the mains
socket if you want to switch the unit OFF
completely.
• Auto Wake
When the system AUTO-WAKE function is “on”,
could be wake up from standby mode In HDMI
/ARC/eARC source by CEC
• Auto Wake ON/OFF
Press remote control play/pause key for 3s, enter
MENU MODE, press NEXT key for 5 time, system
shows Auto Wake ON/OFF, press V+ or V-, switch
to Auto Wake ON/OFF. Press remote control
play/pause key to exist MENU and nish setting.
• Auto STANDBY
When the system AUTO-STANDBY function is
“ON”, the soundbar will turn to STANDYBY mode
if there is no user operation and video/audio
signal input for 15 minutes.
•
Auto Standby ON/OFF
Press remote control play/pause key for 3s, enter
MENU MODE, press NEXT key for 6 time, system
shows Auto Standby ON/OFF, press V+ or V-,
switch to Auto Standby ON/OFF. Press remote
control play/pause key to exist MENU and nish
setting.
•
mains plug from the mains socket.
•
energy when not in use.
Power up subwoofer and press Pair key for
3 seconds until the LED turn to fast ashing.
Press the button on the unit or on the
remote control to switch the unit ON.