User's Manual

Select Modes
Press the (SOURCE) button repeatedly on the
unit or the SOURCE button on the remote control
to select the OPT,COAX, ARC,HDMI,BT_IN
(Bluetooth) and USB mode. The selected
mode will show on the display.
Adjust the Bass/Treble Level
• Press TREBLE then press VOL+/- button to
increase or decrease the treble.
(treble+5 / treble–5)
• Press BASS then press VOL+/- button to
increase or decrease the bass.
(bass+5 / bass–5)
• After about 5 seconds, the unit will exit from
bass/treble setting. The display will show the
current selected mode. You may now press the
VOL+ / - buttons to adjust volume.
14
OPTICAL / COAXIAL /HDMI
ARC Operation
1 Ensure that the unit is connected to the TV or
audio device.
2 Press the
button repeatedly on the unit or
the SOURCE button on the remote control to
select the OPT,COAX,ARC, HDMI,BT_IN,USB
mode.
3 Operate your audio device directly for playback
features.
4 Press the VOL +/– button to adjust the volume
to your desired level.
Tip:
• The unit may not be able to decode all digital
audio formats from the input source. In this
case, the unit will mute. This is NOT a defect.
Ensure that the audio setting of the input
source (e.g. TV, game console, DVD player, etc.)
is set to PCM, Dolby Digital or DTS
(Refer to the
user manual of the input source device for its
audio setting details) with HDMI IN / HDMI ARC
(eARC) / OPTICAl / COAXIAL input.
•
unit will display the following as follows:
Audio (abbreviation) Display
LPCM 2ch PCM AUDIO
LPCM 5.1ch MPCM AUDIO
LPCM 7.1ch MPCM AUDIO
Dolby Digital
DOLBY SURROUND
/ DOLBY AUDIO
Dolby TrueHD
Dolby Digital Plus
Dolby Atmos -
Dolby TrueHD
DOLBY SURROUND
/ DOLBY ATMOS
Dolby Atmos -
Dolby Digital Plus
Bluetooth Operation
Pair Bluetooth-enabled Devices
to this unit, you need to pair your device to this
unit.
DOLBY SURROUND
/ DOLBY ATMOS
Turn the Surround Sound ON/OFF
• Press the SURR button on the remote control
to turn o the surround sound. Press this
Adjust the Volume
• Press the VOL+ / VOL- buttons on the unit or
on the remote control to adjust the volume.
•
(MUTE) button on the remote control. Press
the (MUTE) button again or press the VOL+
/ VOL- buttons to resume normal listening.
Adjust the Brightness
• Press the DIMMER +/- button on the remote
control to select brightness level.
• While playing, press the EQ button on the
remote control to select desired preset
equalizers:
MUSIC, MOVIE, NEWS, SPORT, NIGHT,
GAME, AI EQ.
on
DTS Ditital Surround
DTS:X
DTS
DTS-X
If you wish to mute the sound o,press the
•
•
Display will close after no user action or audio
format change for 15 seconds