Bluetooth® Transmitter/receiver USER GUIDE 10015 - March 2013 - Version 1
English Page 2 BT10-ER - Bluetooth® Transmitter/receiver
English BT10-ER - Bluetooth® Transmitter/receiver 1 - Package contents The BT10-ER transmitter/receiver A USB power cord to charge the battery A Male mini Jack 3.5 mm / Male mini Jack 3.5mm audio cable A Female mini Jack 3.5 / RCA audio cable A Male mini Jack 3.5 / Male mini Jack 3.5 audio connector The user guide 2 - Description 1 - Indicator LED 2 - Multifunctional button: ON / OFF / Peering 3 - Micro USB socket to charge the battery 4 - Jack 3.
English BT10-ER - Bluetooth® Transmitter/receiver Our recommendation After long periods of non-use (several weeks), your BT10-ER indicator LED might not light up. In such instances, please fully charge the battery as you would do if it were the first time. We recommend to charge the battery at least once every two months. 4 - Transmitter mode 4.1 - Activation and deactivation Position the selector (5) onto TX before activating your BT10-ER.
English BT10-ER - Bluetooth® Transmitter/receiver The transmission mode 2 1 3 Transmiter Press multifuction button around 7 seconds blue led blinks quickly Switch to TX mode Jack 3.5mm Receiver 4.3 - Further details A - If the BT10-ER is paired with a aptX compatible device, the indicator LED will flash three times in 4 seconds. The aptX codec guarantees a very low latency and much higher sound quality than other standards Bluetooth® codecs.
BT10-ER - Bluetooth® Transmitter/receiver English 5 - Receiver mode 5.1 - Activation and deactivation Turn the selector (5) on the RX position before turning on the ER-BT10. The mode change can only be made if the BT10-ER is on. Activation: Press the multifunctional button for 7 seconds approximately, until the LED lights blue during 1 second. Deactivation: Press the multifunctional button for 4 seconds until the LED lights red during 1 second. 5.
English BT10-ER - Bluetooth® Transmitter/receiver 5.3 - Further details A - Your BT10-ER wil enter sleep mode if the pairing has not been completed within 2 minutes. B - The PIN code of your device must be 0000, 1111, 8888 or 1234 to connect with your BT10-ER. C - In the event of failure during the pairing process, please repeat the steps aforementioned. D - Your BT10-ER can memorise up to 8 paired devices and will delete the oldest paired device once this number has been reached.
English BT10-ER - Bluetooth® Transmitter/receiver 6.2 - Charging the battery while playing tracks Your BT10-ER is fully operational while the battery is charging. 6.3 - Reconnecting to a Bluetooth® device A - Auto connection: Your BT10-ER will automatically try to connect to the last device used upon activation. B - Manual connection: Short press the multifunctional button to exit stand by mode and try to automatically reconnect to the last device used.
BT10-ER - Bluetooth® Transmitter/receiver English 7 - Precautions and recommendations • Do not use your BT10-ER in extreme environments as its temperature range is 0°C to 35°C. • Please protect your BT10-ER against all liquids and humidity. • Do not drop your BT10-ER as it may cause severe damages and/or destruction of its internal structures. • Do not open your BT10-ER as its internal parts can only be repaired by a qualified technician.
English BT10-ER - Bluetooth® Transmitter/receiver Recycling your device • As HITMUSIC is really involved in the environmental cause, we only commercialise clean, ROHS compliant products. • When this product reaches its end of life, take it to a collection point designated by local authorities. The separate collection and recycling of your product at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment.
BT10-ER - Bluetooth® Transmitter/receiver English Page 11
Because AUDIOPHONY® takes the utmost care in its products to make sure you only get the best possible quality, our products are subjects to modifications without prior notice. That is why technical specifications and the products physical configuration might differ from the illustrations. Make sure you get the latest news and updates about the AUDIOPHONY® products on www.audiophony.com AUDIOPHONY® is a trademark of HITMUSIC S.A.