User Manual

BT10-ER - Bluetooth
®
Transmitter/receiver
Page 4
English
Our recommendation
After long periods of non-use (several weeks), your BT10-ER indicator LED might not light
up. In such instances, please fully charge the battery as you would do if it were the first time.
We recommend to charge the battery at least once every two months.
Position the selector (5) onto TX before activating your BT10-ER. You cannot switch from one
mode to another if the BT10-ER is activated.
Activation:
Press and hold the multifunctional button for 5 seconds until the LED lights blue.
Note: If you removed the BT10-ER from the Bluetooth
®
devices list of your device (smartphone,
tablet, etc.) it will automatically enter Pairing mode. The LED will then flash blue.
Deactivation:
Press and hold the multifunctional button for 3 seconds until the LED lights red during 1
second.
A - Connect one end of the audio cable or audio connector to the Jack socket of your BT10-
ER, while connecting the other end to your device (smartphone, etc.).
B - Switch to TX mode and position your BT10-ER within 1 meter of your Bluetooth
®
receiver
(activate your receiver and its Bluetooth
®
mode).
C - Press and hold the multifunctional button for 5 to 7 seconds until the indicator LED flashes
blue.
D - Your BT10-ER will automatically search for your device and the pairing process will start.
E - Once the connection has been established, the LED will flash blue twice for 4 seconds.
4 - Transmitter mode
4.1 - Activation and deactivation
4.2 - Pairing a Bluetooth
®
device