User Manual

BT10-ER - Bluetooth

Transmitter/receiver

Page 5

English

Transmiter

Receiver

Press

multifuction

button around 7

seconds blue led

blinks quickly

Jack 3.5mm

Switch to TX mode

The transmission mode

A - If the BT10-ER is paired with a aptX compatible device, the indicator LED will flash three

times in 4 seconds. The aptX codec guarantees a very low latency and much higher sound

quality than other standards Bluetooth

codecs.

B - If pairing is not completed within two minutes, the BT10-ER enters standby mode.

C - The BT10-ER supports devices whose PIN is 0000, 1111, 8888 or 1234.

Indication BT10-ER Status

Constantly flashes blue 2-minute pairing process

Flashes blue every second Stand-by mode, not connected

Flashes blue twice every 4 seconds Connected

Flashes red Battery almost fully discharged

4.4 - LED reactions in transmission mode

4.3 - Further details