User Manual

BT10-ER - Bluetooth
®
Transmitter/receiver
Page 6
English
The reception mode
5 - Receiver mode
Turn the selector (5) on the RX position before turning on the ER-BT10. The mode change can
only be made if the BT10-ER is on.
Activation:
Press the multifunctional button for 7 seconds approximately, until the LED lights blue during
1 second.
Deactivation:
Press the multifunctional button for 4 seconds until the LED lights red during 1 second.
5.1 - Activation and deactivation
A - Connect one end of the audio cable to the Jack socket of your BT10-ER, while connecting
the other end to your sound system (e.g. amplified speakers).
B - Enter RX mode, and position your BT10-ER within one meter of your Bluetooth® device.
C - Press the mulfitunctional button for 6 to 8 seconds until the LED alternates blue and red
flashes.
D - Activate the Bluetooth® function of your device, search for AUDIOPHONY-BT10-ER in
the Bluetooth® devices list.
E - The LED will flash blue twice in 4 seconds to indicate the pairing is successful.
5.2 - Pairing a Bluetooth
®
device
Jack 3.5mm
Switch to RX mode
AUDIOPHONY-BT10-ER
PIN 0000 or
Tap connect
Pairing
2
3
1
Press
around
7 seconds
till red
and blue led
blinks
quickly