Owner manual

17
Push the  button to choose the rst station in the
sequence of the manual program to start.
e “run time” for each station will be displayed as
currently programmed. For this cycle only, you can
customize each station run time without eecting the
individually programmed station run times within a
program.
Push the  button to sequence through all the stations,
using the + or – buttons to select the desired run times
for this cycle only.
Push the  button until the station number appears of
which you want to start this custom cycle.
Rotate dial to “RUN” to start this custom, one-time
cycle. It will start with station number displayed in
Step 6. Once completed, controller will revert to
programmed “automatic” operation.
3)
4)
5)
6)
7)
MANUAL PROGRAM