Ltd. Network Adapter User's Manual

4.1 Configuring NetWare 2.15 and 3.x

4-4

NetWare Configuration

Chapter 4

4.1.4 Configure the Print Server

Use the following procedure to configure the Print Server’s function:

1. Choose the print server name from the

Print Servers list and press

The

Print Server Information menu appears.

2. Choose

Print Server Configuration from the menu and press .

3. Choose

Printer Configuration from the menu and press .

This displays the

Configured Printers menu. Since this is a new

Print Server entry, all printers are labeled “Not Installed”.

4. Choose the printer and press . The

Printer 0 Configuration

screen appears with a title of Printer 0, as shown in the following

example.

5. If you choose to, change the default in the Name field on this form

to MFP or something else that helps you identify the printer. The

print server uses this name in its message back to the users on the

Notify list. Select

Name, enter a name, and then press .

6. Select

Type and press . This displays a list of printer types.

Choose

Remote Other/Unknown and press . This creates

default entries in the other fields. These defaults are usually opti-

mal, so do not change them without specific knowledge of the

effects.

7. Press . At the prompt, choose to save your changes.

Enter

Esc