Ltd. Network Adapter User's Manual

4.2 Configuring NetWare 4.x — Bindery Emulation

4-12

NetWare Configuration

Chapter 4

Use Quick Setup to connect your print server, print queue and

printer correctly. You can modify these later if you need to.

5. Select

Print server and press to modify the entry.

6. Type the name of the print server in the

Print server field and

press .

Note

7. Press to move to the New printer field. Type a name and press

8. Press to move to the

New print queue field. Type a name and

press .

9. Press to move to the

Printer type field and press . From

the list of printer types, select

Other/Unknown and press .

10. When you are finished, press to save the configuration.

Repeat steps 5 through 10 for each file server that the printer

server services.

11. To view, add, delete, or modify print servers or queues after the

initial setup, select either the

Print Queues or Print Servers

option on the

Available Options screen.

• The print server name is printed under the Novell Network Information

on the status report. The factory default name is MLT_<serial num-

ber>.

Enter

F10