Ltd. Network Adapter User's Manual

4.5 Using the Novell PCONSOLE Utility
4-25
NetWare Configuration
Chapter 4
4.5.2 Changing Print Queues
When you print a file, your system sends the file to a print queue. The
print server assigned to that queue extracts the print job and sends it to
the assigned printer. If a print server is servicing queues on multiple
file servers, you must assign queues to the printer on each file server.
To change the print queues, use the following procedure:
1. Start the PCONSOLE utility.
2. Select
Print Server Information from the Available Options
menu.
3. Select the print server from the list.
4. Select
Print Server Configuration from the menu.
5. Select
Queues Serviced by Printer from the menu.
6. Select a printer from the
Defined Printers list.
7. Press at the
File Server/Queue/Priority screen. The Avail-
able Queues
list appears.
8. Select a queue from the list.
9. Press at the
Priority screen to leave the priority setting at 1.
The highest priority is 1; 10 is the last. To change the priority of a
queue, press at the
File Server/Queue/Priority screen to dis-
play the
Priority setting screen. Press to delete the current set-
ting. Type a new number from 1 to 10 and press .
Repeat steps 7, 8, and 9 to assign additional queues to the printer.
10. Press and save all changes.
4.5.3 How to Set Up Notify
You can specify users or groups of users that are notified if a problem
occurs when a print job is sent to the printer. If the print server is
servicing queues on multiple file servers, you must set up a NOTIFY
list for each file server. To set up NOTIFY, use the following
procedure:
1. Start the PCONSOLE utility.
2. Select
Print Server Information from the Available Options menu.
3. Select the print server from the menu.
4. Select
Print Server Configuration from the menu.
Insert
Enter
Enter
Enter
Esc