User's Manual

AT71-250 Transmitter Owner’s Manual
© Linear Industries, Inc. All Rights Reserved 2/38
User Notices and WARNINGS
USER NOTICES
IT IS VERY IMPORTANT TO READ THIS MANUAL PRIOR TO OPERATION OF
THIS TRANSMITTER!
Notice 1
The transmitter main operating voltage setting is marked on the rear of the AT71-250
chassis.
Notice 2
The transmitter operating frequency is set from the factory.
Notice 3
For adjusting the RF output power setting a qualified technician should always employ
the use of an RF Wattmeter and a calibrated dummy load.
Notice 4
Should accident or injury occur to the personnel engaged in the installation, operation,
or service of the equipment, they should seek proper medical attention. It is advisable
that such personnel have familiarity with first-aid practices.
Notice 5
For technical support please call the Linear technical support customer service line at
847/428-5793 ext. 105.
Notice 6
The technical information presented on this manual is sole intellectual propriety of
Linear Industries, Inc. Reproduction of this document in full or partial is prohibited
without written authorization. This document is legally protected by the copyright laws.