User's Manual

AT71-250 Transmitter Owner’s Manual
© Linear Industries, Inc. All Rights Reserved 20/38
 Press ESC to return to the System Alarms/ Log menu
Access the Alarm Log and press ENTER screen to find out if all existing alarms, current
alarms, and also the past alarms.
The symbol '!' is an indication that the alarm is current, (LED ON for alarms) with date and
time of its occurrence. The symbol '#' is an indication that any alarms are no longer present,
(LED ON for past alarm, LED OFF for current alarms), and the date and time mark when it
ceased to occur. The alarm log keeps up to 100 registers.
The Clear Alarm Log if selected, erases the alarm log registers and then registers on the
date and time when the registers were erased.
On the table below is shown all possible alarms, generated on the Digital Exciter and the
associated suggested action to cease its occurrence.
Current Alarms
-> Alarm Log
Drawer Alarms
System Alarm/Log [3000]
Clear Alarm Log
Alarm Log: [3200]
-> ! 25/03/08 10:55:29 Log Cleared
-> ! 28/03/08 20:19:05 LO Lock Fail
-> # 28/03/08 20:22:43 LO Lock Fail