User's Manual

AT71-250 Transmitter Owner’s Manual

Select Modulation Settings and press ENTER.

7.7 Time and date configuration

Press ESC up to Setup Menu screen.

Select Time and Date Setup and press ENTER

To program the date and time, use keys 2 and 4.To change between the parameters, use

keys 1 and 3.

7.8 Password Setup

A valid password is composed by 4 number, that will than become the standard password for

the equipment.

The keys 1 e 3, set the arrow heard underwriting on each one of the 4 password position. The

1 and 3 keys increase or decrease the numerical value of the chosen position. Once you

reach this screen, it is just possible to leave it after the password be choose. Please follow the

sequence below for a complete understanding of the password setup process.

Modulation Settings : [1600]

Modulation : on/off

Pilot Level offset : +0000

(-2.048 to 511)

Setup Menu : [250]

Power Setup

Image Frequency Suppression

Frequency Setup

LO Leakage Suppression

Pre-Correction

Modulation Settings

-> Time and Date Setup

Password Setup

Transmitter Setup

Time and Date Setup: [1700]

Time: HH:MM Date: 25/02/11 DD/MM/YY