User's Manual

AT71-250 Transmitter Owner’s Manual
© Linear Industries, Inc. All Rights Reserved 30/38
 Using a PC local or remote access via Ethernet.
8.1 IP Configuration
Start from the Main Menu
Select Remote Access and press ENTER
Select IP Address and press ENTER.
Configure the IP using the keys 1 or 3 and 2 or 4.
8.2 Mask Configuration
Press ESC up to the Remote Access screen
Select Subnetwork Mask and press ENTER
Configure the Mask using the keys 1 or 3 and 2 or 4.
Main Menu : [0000]
Setup Menu
System Alarms/Log
Measurements
-> Remote Access
Remote Access: [3000]
-> IP Address
Subnetwork Mask
Gateway
IP Address: [4100]
192.168.100.018
Remote Access: 3000]
IP Address
-> Subnetwork Mask
Gateway
Subnetwork Mask: [4200]
192.168.100.018