Operation Manual

Section 5 - System Operation Manual
(E-Compact ATSC Transmitters - EC701HP thru EC708HP)
Manual Rev. 0.0 - August 2016
5-20
>
Use the keys or  to adjust the pilot level.
>
>
5.5.6 Modulation Settings
On this screen option, it’s possible to turn the modulation process on and off. It is also possible
to adjust the pilot level.
Starting from Setup Menu screen [1000]:
Select Modulation Settings and press ENTER.
The screen below will appear.
To access the Modulation Settings, select “Yes” by using the keys or . Selecting NO,
the software goes to the previous screen.
Use the keys  or  to enable or disable the modulation.
Hit key “” to view the next screen.
Use the keys or  to adjust the pilot level. Its range goes from -2048 to +511.
Press key ESC to return to Setup Menu.
>
ATTENTION
When accessing this screen, by selecting option “YES”, the operator will be responsible
for the changes done on this parameter, as well as the effects that these changes may
cause in the equipment if not using the appropriate instruments and test point.
>
>