Operation Manual

Section 4 - Initial Activation (ATSC Transmitters)
Manual Rev. 0.0 - April 2016
4-6
>
Program the value of 10% of rated output.
Use the right button on your keyboard to increase the RF power. Confirm the selected value by
pressing the ENTER key (center key on the keyboard).
* Indicates that the configuration has not been confirmed.
Measuring the power
Select Power in the screen Measurements [2000]. Press ENTER.
 Use “” button to display the remaining items on this menu.
Screen [2100]. The ALC voltage is directly proportional to the RF power at the transmitter output.
>
>
>
>